Overview
The Camburg CAM-120026 is a rear bump stop spacer kit for the 2017–2020 Ford F-150 Raptor. It relocates the factory rubber bump stop so the stop contacts the housing correctly when the rear suspension compresses, which protects the shocks from being bottomed out.
The spacer is needed when installing Deaver leaf springs or when the factory block is removed, because the factory bump stop otherwise sits in the wrong place. The spacer is CNC machined from 6061 aluminum and finished by bead blasting, anodizing and laser etching.
Key features
- Bump stop spacers that move the factory stop to the correct contact point
- CNC machined 6061 aluminum
- Bead blasted, anodized and laser etched finish
- Metric hardware included
- Protects the shocks from bottoming out before the suspension does
Choosing a Spacer Setup
A rear bump stop sets the point where the suspension stops compressing. When the factory block is removed or the truck is changed to leaf springs, the original stop no longer lands where the housing expects it, and a spacer restores that contact point. Before buying, measure the gap between the stop and the housing with the suspension at full compression so you know how much the spacer needs to cover.
Spacers are often installed alongside other suspension changes, such as new shocks or a revised rear lift. Each change can move the contact point, so recheck the stop after any of them. Anodized aluminum resists grime well while the finish is intact, but a scuffed or chipped surface should be cleaned and inspected for corrosion.
- Check bump stop contact at full compression after any suspension change
- Inspect spacers for cracks, corrosion or loose hardware
- Retorque metric fasteners after the first few drives
Specifications
| Brand | Camburg Engineering |
|---|---|
| Part number | CAMCAM-120026 |
| Material | 6061 aluminum |
| Finish | Bead blasted, anodized and laser etched |
| Hardware | Metric |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2017–2020 Ford F-150 Raptor.
Other F-150 trims and model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacer is required when the factory block is removed or when Deaver leaf springs are installed, because the factory rubber bump stop must be relocated so it does not bottom out the shock. For serious off-road use, Camburg also offers an air bump stop kit, which provides additional bottoming control.
What’s included
Bump stop spacers and the metric hardware needed to mount them.









