Overview
The Camburg Ford F-150 Extended Length Rear Shackle Kit, part CAM-120024, is a pair of rear leaf spring shackles for the 2015-2020 Ford F-150, including the Raptor. The extended version runs about 1.5 inches longer than the stock-length shackle and lowers the ride height about 1 inch.
The shackles replace the stock light-duty shackles. The factory units are stamped from thin metal and use rubber bushings vulcanized into the shackle, which flex and bind as they cycle. These Camburg shackles are a fabricated, boxed, gusseted design with polyurethane bushings that pivot more smoothly with less flex.
The shackles have a textured steel gray powder coat matched to Camburg billet arms and to the FOX shock hard anodize finish. The stock-length version keeps the ride height where it was, so the extended version suits owners who want a lower stance. The coordinated finish ties the shackles to the rest of Camburg’s suspension.
Key features
- Boxed, gusseted design, CAD designed and CNC laser cut
- Made from 4130 chromoly and MIG welded
- Polyurethane bushings and sleeves
- Extended length lowers the ride height about 1 inch
- Textured steel gray powder coat, matched to Camburg billet arms
- Made in the USA.
Bushing care and shackle wear
Polyurethane bushings resist the rubber flex that a factory shackle develops, but they need lubrication to stay quiet. Grease the bushings and sleeves at the interval your use calls for, and wipe away grit that collects at the pivot. Dry or squeaking bushings usually mean the grease has worn away or been contaminated.
Extended shackles change the angle of the spring at the rear, which can increase the load on the shackle pins over rough terrain. Inspect the pins, bolts and shackle plates after the first few trips, looking for play, cracks at welds or a bushing that has pushed out of its bore. Keep shock and brake line clearance in mind when lowering the rear, and check the driveline angle after installation.
- Grease bushings at regular intervals
- Check welds and plates for cracks
- Inspect for play at the pivot
Specifications
| Brand | Camburg Engineering |
|---|---|
| Part number | CAM-120024 |
| Position | Rear |
| Material | 4130 chromoly |
| Eye-to-eye length | Extended version 6 inch; stock length 4.5 inch |
| Finish | Powder coat, Camburg steel gray |
| Bushings | Polyurethane with sleeves; grease packets included |
Vehicle fitment
It fits the 2015-2020 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT trims.
The 2004-2014 F-150 and the 2021 and later models fall outside this fitment. Verify year, model and trim against your vehicle before buying.
Installation notes
The shackles are bolted on with the factory hardware. The stock-length versions do not work with ICON leaf springs, and Camburg says both lengths are designed for stock and Deaver leaf springs.
What’s included
One pair of shackles with polyurethane bushings and sleeves, plus bushing grease packets.
Not included: the factory hardware, which the shackles bolt on with.














