Overview
The Camburg KINETIK Uniball Upper Control Arm Rebuild Hardware Kit, part number CAM-310151, is a rebuild kit for KINETIK series billet upper arms. It supplies the hardware and heim joint parts needed to rebuild those arms and is made for performance and long-travel arms.
This kit is hardware and rebuild parts only. The arms and uniball caps are not included, so it suits owners who already have KINETIK billet upper arms and need to refresh the joints. The finish is raw.
The kit fits Toyota Sequoia models from 2008 to 2021 and Toyota Tundra models from 2007 to 2021.
Key features
- Complete hardware and rebuild set for KINETIK billet upper arms
- Heim joint type
- Made for performance and long-travel arms
- Raw color
- Arms and uniball caps not included
- Part number CAM-310151
Keeping heim joints in good shape
Heim joints carry the pivot load of the upper arm, and the rod end ball and housing wear over time. Check for play by gripping the arm near the joint and feeling for movement. Look for cracked or dry boots, and for corrosion on the threads. A raw finish shows corrosion sooner than painted parts, so wipe the hardware clean and apply a light coat of grease at assembly.
Before rebuilding, inspect the arm for cracks, bent sections and wear in the bore. Keep matching hardware together during assembly and tighten fasteners to the values in a service manual for the vehicle. Worn heim joints can change steering feel and alignment before they fail, so catching play early helps protect the rest of the front end.
- Check for play at the joint after each trail season
- Replace boots that show cracks or tears
- Keep spare fasteners and cotter pins on hand
Specifications
| Brand | Camburg Engineering |
|---|---|
| Part number | CAM-310151 |
| Type | Heim joint rebuild hardware kit |
| Arms supported | KINETIK series billet upper arms |
| Color | Raw |
| Not included | Upper arms and uniball caps |
| Fit | Direct fit |
Vehicle fitment
It fits 2008 to 2021 Toyota Sequoia models, including Limited, Nightshade, Platinum, SR5, TRD Pro and TRD Sport trims. It fits 2007 to 2021 Toyota Tundra models, including 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims. Toyota 4Runner and Tacoma models, and Jeep vehicles, are not covered. Confirm the fit against your arms before ordering.
Toyota 4Runner and Tacoma models, and Jeep vehicles, are not in this list. Confirm the fit against your arms before ordering.
Installation notes
A rebuild requires the upper arms as well as this hardware. Rebuild steps are not covered here, so heim joint work is best left to someone familiar with billet arm rebuilds.
What’s included
The rebuild hardware and heim joint parts for KINETIK series billet upper arms. Not included: the upper arms themselves and the uniball caps.









