Overview
The Camburg CAM-330027 is a pair of extended front brake lines, one for the driver side and one for the passenger side, for the 2005–2021 Toyota Tacoma with Camburg 3 inch lift suspension systems.
Camburg Engineering builds the lines with a Teflon liner, stainless steel and Kevlar braiding, and an additional protective clear covering. They come with everything needed to connect to the original mounts and fittings.
Key features
- Driver and passenger side front lines
- Extended length for 3 inch lift suspension systems
- Teflon-lined with stainless steel and Kevlar braiding
- Protective clear covering
- Installation hardware included
- Connects to the original equipment mounts and fittings
Before you buy
Extended brake lines carry fluid from the frame to the caliper, and on a lifted truck they must flex through a longer range of suspension travel. Routing and the length of the flexible section matter more than on a stock vehicle. Before installing, check how the lines sit at the frame bracket and the caliper, and make sure nothing rubs the tire, tie rod or steering parts at full turn or full droop.
Braided stainless lines resist swelling under pedal pressure better than rubber, which tends to firm up the pedal, but they still need periodic inspection. Look at the covering for abrasion, check each fitting for seepage, and replace any line that shows cracks or bulges. Brake fluid absorbs moisture over time, so bleed the system after any line change and refill with fresh fluid. Pads, rotors and the hard lines are often worth checking at the same time.
- Check line routing at full steering lock and full droop
- Bleed the brakes after any line replacement
- Inspect fittings for seepage after the first few drives
- Look for chafing against suspension and steering parts
Specifications
| Brand | Camburg Engineering |
|---|---|
| Part number | CAM-330027 |
| Type | Extended front brake line kit |
| Position | Front, driver and passenger side |
| Designed for | Camburg 3 inch lift suspension systems |
| Liner | Teflon |
| Braiding | Stainless steel and Kevlar |
| Cover | Clear protective covering |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2021 Toyota Tacoma.
Other Toyota models and pre-2005 Tacomas are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes everything needed to install the lines on the original equipment mounts and fittings. No fabrication is required.
What’s included
Driver and passenger side front brake lines, plus the hardware to install them to the OEM mounts and fittings.









