Overview
The Camburg Upper Control Arm Bushing and Sleeve Kit, part number CAM-310023, is a set of replacement polyurethane bushings and pivot sleeves for upper arms. It fits 2005 to 2019 Toyota Tacoma models, and the kit is black.
Each kit contains eight polyurethane bushings and four pivot sleeves. Four 90 degree grease zerk fittings allow the new bushings to be greased, and four bushing grease packets are included. The kit freshens worn upper arms without replacing the arms.
The kit is designed for Camburg bushing upper arms. Confirm the arm type matches your arms before ordering.
Key features
- Eight polyurethane bushings
- Four pivot sleeves
- Four 90 degree zerk fittings
- Four bushing grease packets
- Black finish
- Replaces bushings and sleeves without new arms
Signs the bushings are worn
Worn upper arm bushings often show up as clunks over bumps, a loose or wandering steering feel, or uneven tire wear from changes in alignment. Polyurethane resists some of the wear that softer rubber shows, but it can still crack or harden with age. Look at the bushings and sleeves for splits, flattening, or gaps around the sleeve.
Before the new parts go in, clean the arm and check the bores for damage. Grease the new bushings at installation and recheck the grease at regular intervals. A shop with a press and the right adapters usually handles this job best, especially for owners new to arm work.
- Clunks over bumps
- Wandering or loose steering feel
- Uneven tire wear
- Splits or flattening in the bushing
Specifications
| Brand | Camburg Engineering |
|---|---|
| Part number | CAM-310023 |
| Type | Polyurethane bushing and sleeve kit |
| Bushings | 8 polyurethane |
| Pivot sleeves | 4 |
| Zerk fittings | 4, 90 degree |
| Grease packets | 4 |
| Color | Black |
| Fit | Direct fit |
Vehicle fitment
It fits 2005 to 2019 Toyota Tacoma models, including Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims. Confirm your vehicle’s year, model and trim before ordering.
Toyota 4Runner and Tundra models are outside this coverage.
Installation notes
Bushing replacement means pressing out the old bushings, so plan for a press or a shop. Steps for the job are not covered here.
What’s included
Eight polyurethane bushings, four pivot sleeves, four 90 degree zerk fittings and four bushing grease packets.








