Towing
Showing 1057–1068 of 1114 resultsSorted by popularity
-
Suspension Load Leveling Kit
Firestone Ride-Rite Rear Air Helper Spring Kit – 2430
- Firestone Ride-Rite rear axle mount air helper kit, part 2430
- Double convoluted air springs rated for up to 4,800 lbs per pair
- Bolt-on installation with no drilling required
- Manual inflation; optional compressor and gauges not included
- Fitment depends on your vehicle’s year, model and trim.
SKU: FIR2430 -
Suspension Load Leveling Kit
Firestone Ride-Rite Sport-Rite Rear Air Helper Spring Kit – 2320
- Firestone Ride-Rite Sport-Rite rear leaf spring mount air helper kit, part 2320
- Tapered sleeve air springs rated for 3,000 lbs per pair
- Manual inflation; installation requires drilling
- Optional compressor and gauges are not included
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: FIR2320 -
-
-
Suspension Load Leveling Kit
AirLift LoadLifter 5000 Ultimate Air Spring Kit – 88275
- AirLift LoadLifter 5000 Ultimate rear air spring kit, model 88275
- Adjustable air pressure with an internal jounce bumper
- Designed to run safely with zero air pressure
- Listed installation time of 2 hours
- No vehicle fitment listed; check manufacturer specifications
SKU: AIR88275 -
-
Cargo Net
Smittybilt CRES2 HD Cargo Restraint – 571135
- CRES2 heavy duty cargo restraint for two-door Jeep models
- 2-inch military grade nylon webbing with 1,200 lbs tensile strength
- Side and rear curtains included; triple stitched construction
- Black oxide grommets and nylon reinforced buckles
SKU: S/B571135 -
Suspension Load Leveling Kit
Firestone Ride-Rite Coil-Rite Rear Air Helper Spring Kit – 4135
- Firestone Ride-Rite Coil-Rite rear air helper spring kit, model 4135
- In coil system rated at 500 lbs per pair
- Coil type bags, manual inflation, no drilling required
- Not compatible with lift kits or height sensors
- Fitment not listed
SKU: FIR4135 -
Suspension Load Leveling Kit
LoadLifter 5000 Ultimate Plus
- AirLift LoadLifter 5000 Ultimate Plus rear air spring kit
- Rated for up to 5000 lbs of load leveling capacity
- Internal jounce bumpers inside the springs absorb shock
- Air adjustable from 5 to 100 psi; can run at zero air pressure
- Fitment not listed
SKU: AIR89204 -
Trailer Hitch Ball Mount
Smittybilt 10 Inch Drop Ball Mount (Black) – 2910
- Class III drop ball mount with a 10 inch drop
- Hammer forge hardened Q235 steel, robotic welded with reinforced gussets
- Tough powder coat finish for corrosion and rust protection
- Rated for 3,500 lbs GTW and 350 lbs tongue weight; fits 2 by 2 inch receivers
SKU: S/B2910 -
Suspension Load Leveling Kit
Firestone Ride-Rite Rear Air Helper Spring Kit – 2350
- Firestone Ride-Rite rear air helper spring kit, model 2350, axle mount
- Rated for 4,800 lbs of load leveling capacity per pair
- Bolt on installation, no drilling required
- Double convoluted air bags with manual inflation
- Fitment not listed; lift kits may need spacers
SKU: FIR2350
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











