Overview
The Firestone Ride-Rite rear air helper spring kit, model 2350, is an axle-mount kit rated for 4,800 lbs of load leveling capacity per pair. It uses double convoluted air bags and mounts to the axle without drilling.
Pressure is set by manual inflation, so a separate compressor and gauges are needed, and both are sold separately. The kit is lift kit compatible, though spacers may be required on some setups.
Key features
- Axle mount system
- 4,800 lbs of load leveling capacity per pair
- Bolt on installation, no drilling required
- Double convoluted air bags
- Manual inflation to adjust level
- Optional height sensor
- Lift kit compatible, may require spacers
Axle mount bags and level
Axle mount bags sit between the axle and the body, so they are exposed to road spray, grit and temperature changes. Keep the bag surfaces clean and check the mounting brackets for wear at each service. Because the bags are inflated by hand, a steady gauge and a consistent routine make it easier to keep the ride even from one trip to the next.
Level is best judged by measuring the same reference points on both sides of the vehicle. Adjust the bags a little at a time and recheck after each change. If one side always sits lower, look for a leak, a fitting that has backed off or an uneven load before adding more air.
- Measure both sides at the same reference point
- Adjust pressure in small steps
- Check mounting brackets at each service
- Look for leaks when one side sits low
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model number | 2350 |
| UPC | 767555108901 |
| System type | Axle mount |
| Load capacity | 4,800 lbs per pair |
| Bag type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
| Compressor and gauges | Sold separately |
Vehicle fitment
Verify that your year, model and trim are suitable before ordering. Check axle compatibility before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Equal pressure in both bags keeps the vehicle level, so adjust them evenly. If you run a lift, measure the gap between the bags and the axle after mounting.
What’s included
No parts list is given for this kit.
Not included: compressor and gauges, sold separately.








