Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Load Leveling Kits & Components
Showing 49–60 of 77 resultsSorted by popularity
-
Suspension Air Helper Spring Kit
AirLift 1000 Lift – 60840
- Air Lift 1000 Lift air spring kit, part number AIR60840, up to 1,000 lbs of leveling capacity
- Adjustable from 5-35 PSI on most applications
- Includes all hardware, air lines, Schrader valve and a fully illustrated installation guide
- Fits the 2006–2018 Toyota RAV4
SKU: AIR60840 -
Suspension Air Helper Spring Kit
Air Lift LoadLifter 7500 XL Air Spring Kit – 57531
- Air Lift LoadLifter 7500 XL rear air spring kit, part number AIR57531
- Rated for up to 7,500 pounds of load-leveling capacity
- Fits the 2019–2026 Ram 3500 in Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, SLT and Tradesman trims
SKU: AIR57531 -
Suspension Air Helper Spring Kit
Air Lift LoadLifter 5000 Air Spring Kit – 57231
- Air Lift LoadLifter 5000 rear air spring kit, part number AIR57231
- Fits the 2019–2026 Ram 3500 in listed trims: Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, SLT, Tradesman
- Rear application, air bag system type
SKU: AIR57231 -
-
Coil Spring Helper
Supersprings SumoSprings Coil Springs Spacers – CSS-1168
- Supersprings SumoSprings CSS-1168 rear spring spacer, installed above the leaf springs
- Works with the existing suspension to reduce rear-end sag
- Anti-sway design reduces body roll
- No vehicle named; fitment not stated
SKU: SPRCSS-1168 -
Suspension Air Helper Spring Kit
Firestone Ride-Rite Air Helper Spring – 7325
- Firestone Ride-Rite 7325 heavy duty air helper spring replacement bag
- Provides up to 5000 lbs of leveling capacity
- Keeps the vehicle level and improves stability under load
- Universal fit per the manufacturer; no vehicles listed
SKU: FIR7325 -
Suspension Air Helper Spring Kit
Firestone Ride-Rite Sport-Rite Air Helper Spring – 7012
- Firestone Ride-Rite 7012 Sport-Rite air helper spring kit
- Provides up to 3000 lbs of leveling capacity
- Reversible sleeve air bag, 5 inches in diameter
- Installed height 10.5 inches, max extended and compressed height 14.5 inches
- Mounting: 3/4″-16 combo stud top, 3/8″-16 blindnut bottom, 1/8 NPT air inlet
SKU: FIR7012 -
Coil Spring Helper
Crown Automotive Lower Spring Isolator – 52089330AB
- Crown Automotive front lower spring isolator, part number 52089330AB
- Fits 2006-2009 Jeep Commander (XK), 2005 Jeep Grand Cherokee (WJ) and 2006-2009 Jeep Grand Cherokee (WK)
- Driver or passenger side; sold individually
- UPC 848399039801
SKU: CRO52089330AB -
-
What load leveling products do
When a trailer tongue or heavy cargo sits behind the rear axle, the back of the vehicle squats and the nose rises. That changes steering feel, headlight aim and braking. Helper springs add support to the existing suspension to reduce sag. They do not raise the rated capacity of the vehicle, and tow ratings, payload and hitch limits stay as the manufacturer states.
Main types
- Air helper springs: air bags that sit inside coil springs or beside leaf springs. The pressure can be raised for loads and lowered when empty, and some kits include an onboard compressor or inflation valves.
- Rubber or polyurethane helpers: systems such as Timbren SES use a spring-like rubber unit that adds support without air or maintenance and can be fitted front or rear.
- Leaf spring helpers: steel helper leaves that add stiffness once the load compresses the springs.
- Coil spring helpers: add-on units that work inside or around coil springs.
Choosing a system
Consider how often you tow or haul. Adjustable air systems suit variable loads, while fixed rubber units are simple for steady use. Look at the maximum load or capacity rating, air pressure range, and whether the kit is vehicle specific. Check the listing for position: front or rear, and whether it suits 2WD or 4WD. Note claims such as no-drill installation and expected install time, and expect actual time to vary by vehicle and experience.
Installation and maintenance
Support the vehicle on jack stands and follow the instructions to route air lines away from heat, sharp edges and exhaust parts. Leak test air fittings with soapy water. Keep minimum air pressure in bags as the maker specifies, even when unloaded, and never exceed the maximum rating. Since suspension is safety related, use professional installation if you are not confident.
Think about the whole towing setup. Helper springs address sag, but they do not replace a properly rated hitch, a weight-distributing hitch where needed, trailer brakes or correct tire pressures. Tongue weight, usually around ten to fifteen percent of the trailer weight for conventional trailers, has a large effect on how much the rear squats, so check it with a scale and stay inside the limits in your owner's manual.
Some systems also help off the highway. Rubber units stay out of the way of the axle and keep working without maintenance, and add resistance near the end of the travel, which some drivers like for carrying a camper or heavy bumper. Air systems let you drop pressure for comfort when empty. Whichever you choose, check clearance to the exhaust, brake lines and driveshaft, and look over the mounts and fittings after the first few trips and periodically after that. If your vehicle already has an aftermarket lift or air springs, confirm the helper system is compatible with it.
Also check your owner's manual for the gross axle weight rating, since helper springs do not change it. If the rear axle is already at its limit with a load, the correct fix is to reduce weight, not to add support. Re-inspect the installation after the first loaded trip, looking for rubbing on brake lines, wiring, the exhaust or the tires, and confirm that bolts remain tight.
Compatibility
Kits are matched to specific vehicles and axle positions. Confirm your exact year, make, model and drivetrain and review the manufacturer's specifications before choosing a product below.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
Popular Load Leveling Kits & Components brands
Shop Load Leveling Kits & Components by type
Load Leveling Kits & Components FAQ
Does a load leveling kit increase my towing capacity?
No. Helper springs improve ride height and stability under load, but they do not change the tow rating, payload rating or hitch limits set by the vehicle manufacturer. Always stay within the published ratings for your vehicle and trailer.
What is the difference between air springs and rubber helper springs?
Air springs can be adjusted by changing air pressure to suit the load, while rubber helpers like Timbren units are fixed, need no air system and are simple to maintain. The choice depends on how variable your loads are.
How much air pressure should I run in air helper springs?
Follow the maker's instructions for minimum and maximum pressure. Keep a minimum amount in the bags even when unloaded, add air to level the vehicle under load, and never go beyond the stated maximum.
Can I install a load leveling kit myself?
Many kits are marketed as bolt-on and no-drill, and mechanically inclined owners often install them. Because suspension is safety related, follow the instructions and torque specifications closely, or use a professional if you are unsure.












