Overview
The Firestone Ride-Rite 7012 is a Sport-Rite air helper spring kit for leveling vehicles that carry off-center or heavy loads. Air helper springs add support to the suspension so the vehicle stays level and the ride steadies under load. This part uses a reversible sleeve air bag and a tapered spring design, and it is a medium duty kit.
It keeps the vehicle level, reduces suspension fatigue and bottoming out, and increases vehicle stability when air adjustments are made. It is a universal fit replacement bag, and fitment is not confirmed for a specific vehicle.
Key features
- Keeps the vehicle level and levels off-center loads
- Provides up to 3000 lbs of leveling capacity
- Tapered spring design for medium duty use
- Reversible sleeve air bag
- Reduces suspension fatigue and bottoming out
- Air adjustments can improve ride and vehicle stability
Keeping a leveling bag in service
A reversible sleeve air bag rolls and flexes as the suspension moves, so it is exposed to heat, road debris and repeated compression. Checking the sleeve for abrasion, cracking and oil contamination helps prevent a sudden loss of air. Keeping the mounting studs tight and the air line free of kinks also helps the bag hold its height.
Medium duty leveling kits are often paired with heavier-duty shock absorbers when towing. When changing the bag, compare the installed height and stud pattern with the old unit before removing it. Mark the original air line position so it reconnects without strain.
- Recheck the top stud nut after the first drive
- Replace the bag if the sleeve shows cracks or bulges
- Keep the air inlet free of dirt before reconnecting
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 7012 |
| UPC | 767555014936 |
| Bag type | Replacement bag |
| Air bag type | Reversible sleeve |
| Air bag diameter | 5 inches |
| Installed height | 10.5 inches |
| Max extended height | 14.5 inches |
| Max compressed height | 14.5 inches |
| Air inlet size | 1/8 NPT |
| Mounting type | (1) 3/4″-16 combo stud top, (1) 3/8″-16 blindnut bottom |
| Leveling capacity | Up to 3000 lbs |
Vehicle fitment
No vehicles are confirmed for part number 7012. It is a universal fit part, so it is not tied to one make or model, and the 3/4″-16 top stud and 3/8″-16 bottom blindnut must match your mounting points before installing.
Confirm your vehicle’s year, model and trim before ordering. Compare the installed height and mounting with your suspension before fitting.
Installation notes
The top mount is a combo stud and the bottom mount is a blindnut, so confirm both thread sizes match your brackets. Air helper springs hold compressed air, so release the pressure before disconnecting the 1/8 NPT air inlet.
What’s included
The kit is a replacement air bag with the mounting type shown above. Check the package contents on arrival for any other hardware or fittings.









