Overview
The Air Lift 1000 Lift air spring kit, part number AIR60840, is a rear air spring kit for the 2006–2018 Toyota RAV4. It provides up to 1,000 pounds of leveling capacity when towing or hauling a heavy load.
The air springs fit inside the rear coil springs of coil-sprung vehicles, and no frame drilling is required. The rugged design includes air springs and all hardware.
Key features
- Up to 1,000 lbs of leveling capacity
- Air springs adjustable from 5-35 PSI on most applications
- No frame drilling required
- Eliminates sag and bottoming out.
- Air lines and Schrader valve included
Pressure and load settings
Adjustable air springs let you match the support to the load in the bed or behind the hitch. Start with the pressure that levels the vehicle at the rear with the load in place, then make small changes instead of large jumps. Overfilling a spring can make the ride harsh and stress the bag, while underfilling leaves the rear sagging under weight.
Because the springs sit inside the rear coil springs, the coil spring geometry and bump stops still set how the rear travels over bumps. Inspect the rear shocks before adding air springs, since worn shocks can let the truck bounce after a load is added. Route the air lines away from hot exhaust parts and moving components, and secure them so they do not rub. A periodic check of the valve and gauge keeps pressure accurate over time.
- Set pressure with the load in place
- Route lines clear of exhaust and moving parts
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR60840 |
| Model | 1000 Lift |
| Leveling capacity | Up to 1,000 lbs |
| Adjustable pressure | 5-35 PSI on most applications |
| Front or rear application | Rear |
| Type of system | Air bag |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2018 Toyota RAV4 in the Adventure, Base, EV, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport and XLE trims.
RAV4 model years outside 2006–2018 are not covered, and trims not named in the list are not covered either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes all hardware, air lines and a Schrader valve, plus a fully illustrated installation guide. Because the air springs sit inside the rear coil springs, follow the guide’s order of steps and set the pressure within the 5-35 PSI range.
What’s included
Air lines, a Schrader valve and all installation hardware are included, along with a fully illustrated installation guide.









