Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Load Leveling Kits & Components
Showing 13–24 of 77 resultsSorted by popularity
-
Load Leveling Kits & Components
Timbren Ford Spacer Kit – SPCRFF350SDC
- Adapts the Timbren SES kit FF350SDC to lifted Ford F-250 and F-350 pickups
- Fully adjustable ride height, up to 7.75 in with the SES assembly
- Includes a pair of 1 in rubber spacers and a pair of 1/2 in rubber spacers
- Includes all necessary hardware
- Manufacturer fitment list covers 2005–2022 Ford F-250 and F-350 Super Duty
SKU: T/ISPCRFF350SDC -
Leaf Spring Helper /Load Leveler Mounting Kits
Supersprings Support Bracket Assembly – P3KT
- Supersprings support bracket assembly, part number P3KT
- Includes poly spring pads and hardware
- Fits 2011–2013 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Platinum, XL and XLT trims
- Suited to rough road use as an optional upgrade
SKU: SPRP3KT -
Leaf Spring Helper
Supersprings SuperSprings – SSA7
- SuperSprings SSA7 leaf helper spring, part number SPRSSA7, for rear leaf springs
- Fits 1971–1998 Dodge B-series vans, 1987–2010 Dodge Dakota and 1993–1998 Toyota T100
- Adjustable, with an 800-6000 lbs capacity range
- Mounts above the rear leaf springs, with the anti-sway design described
SKU: SPRSSA7 -
Leaf Spring Helper
Supersprings SuperSprings – SSA20
- SuperSprings SSA20 leaf helper spring, part number SPRSSA20, for rear leaf springs
- Fits 2004–2015 Nissan Titan and 2016 Nissan Titan XD trims
- Adjustable, with a capacity range of 800-6000 lbs
- Installs directly over the rear leaf springs
SKU: SPRSSA20 -
Leaf Spring Helper
Supersprings SuperSprings – SSA19
- SuperSprings SSA19 leaf helper spring, part number SPRSSA19, for rear leaf springs
- Fits 2005–2013 Toyota Tacoma Base and Pre Runner trims
- Adjustable, with an 800-6000 lbs capacity range
- Installs above the rear leaf springs and works with the factory suspension
SKU: SPRSSA19 -
Suspension Air Helper Spring Kit
Supersprings SumoSprings Load Leveling Air Bag Springs – SSF-201-47
Suspension Air Helper Spring KitSupersprings SumoSprings Load Leveling Air Bag Springs – SSF-201-47
- Front load leveling springs for selected 2001–2010 Chevrolet Silverado and GMC Sierra trucks
- Maximum load 3000 lbs at 50 percent compression per pair or set
- No drill required; hardware included
- Part number SPRSSF-201-47
SKU: SPRSSF-201-47 -
Coil Spring Helper
Supersprings SumoSprings Coil Springs Spacers – CSS-1195
- Supersprings SumoSprings coil spring spacers that work in parallel with the existing suspension
- Increased spring rate is said to reduce rear-end sag and improve towing
- Anti-sway properties are said to reduce body roll
- Direct fit for many makes and models
- Part number SPRCSS-1195
SKU: SPRCSS-1195 -
-
Suspension Air Helper Spring Kit
SuperSprings SumoSpring Air Helper Spring Set – SSR-406-47
- Fits the 1997–2006 Jeep Wrangler TJ and 2004–2006 Jeep Wrangler LJ per the manufacturer fitment list
- Sold as a left and right pair of rear SumoSprings
- Patented micro-cellular urethane, maintenance-free, with no air lines or compressors required
- 2500 lb capacity at 50% compression
- Compresses up to 80% of original height with full memory rebound
SKU: SPRSSR-406-47
What load leveling products do
When a trailer tongue or heavy cargo sits behind the rear axle, the back of the vehicle squats and the nose rises. That changes steering feel, headlight aim and braking. Helper springs add support to the existing suspension to reduce sag. They do not raise the rated capacity of the vehicle, and tow ratings, payload and hitch limits stay as the manufacturer states.
Main types
- Air helper springs: air bags that sit inside coil springs or beside leaf springs. The pressure can be raised for loads and lowered when empty, and some kits include an onboard compressor or inflation valves.
- Rubber or polyurethane helpers: systems such as Timbren SES use a spring-like rubber unit that adds support without air or maintenance and can be fitted front or rear.
- Leaf spring helpers: steel helper leaves that add stiffness once the load compresses the springs.
- Coil spring helpers: add-on units that work inside or around coil springs.
Choosing a system
Consider how often you tow or haul. Adjustable air systems suit variable loads, while fixed rubber units are simple for steady use. Look at the maximum load or capacity rating, air pressure range, and whether the kit is vehicle specific. Check the listing for position: front or rear, and whether it suits 2WD or 4WD. Note claims such as no-drill installation and expected install time, and expect actual time to vary by vehicle and experience.
Installation and maintenance
Support the vehicle on jack stands and follow the instructions to route air lines away from heat, sharp edges and exhaust parts. Leak test air fittings with soapy water. Keep minimum air pressure in bags as the maker specifies, even when unloaded, and never exceed the maximum rating. Since suspension is safety related, use professional installation if you are not confident.
Think about the whole towing setup. Helper springs address sag, but they do not replace a properly rated hitch, a weight-distributing hitch where needed, trailer brakes or correct tire pressures. Tongue weight, usually around ten to fifteen percent of the trailer weight for conventional trailers, has a large effect on how much the rear squats, so check it with a scale and stay inside the limits in your owner's manual.
Some systems also help off the highway. Rubber units stay out of the way of the axle and keep working without maintenance, and add resistance near the end of the travel, which some drivers like for carrying a camper or heavy bumper. Air systems let you drop pressure for comfort when empty. Whichever you choose, check clearance to the exhaust, brake lines and driveshaft, and look over the mounts and fittings after the first few trips and periodically after that. If your vehicle already has an aftermarket lift or air springs, confirm the helper system is compatible with it.
Also check your owner's manual for the gross axle weight rating, since helper springs do not change it. If the rear axle is already at its limit with a load, the correct fix is to reduce weight, not to add support. Re-inspect the installation after the first loaded trip, looking for rubbing on brake lines, wiring, the exhaust or the tires, and confirm that bolts remain tight.
Compatibility
Kits are matched to specific vehicles and axle positions. Confirm your exact year, make, model and drivetrain and review the manufacturer's specifications before choosing a product below.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
Popular Load Leveling Kits & Components brands
Shop Load Leveling Kits & Components by type
Load Leveling Kits & Components FAQ
Does a load leveling kit increase my towing capacity?
No. Helper springs improve ride height and stability under load, but they do not change the tow rating, payload rating or hitch limits set by the vehicle manufacturer. Always stay within the published ratings for your vehicle and trailer.
What is the difference between air springs and rubber helper springs?
Air springs can be adjusted by changing air pressure to suit the load, while rubber helpers like Timbren units are fixed, need no air system and are simple to maintain. The choice depends on how variable your loads are.
How much air pressure should I run in air helper springs?
Follow the maker's instructions for minimum and maximum pressure. Keep a minimum amount in the bags even when unloaded, add air to level the vehicle under load, and never go beyond the stated maximum.
Can I install a load leveling kit myself?
Many kits are marketed as bolt-on and no-drill, and mechanically inclined owners often install them. Because suspension is safety related, follow the instructions and torque specifications closely, or use a professional if you are unsure.











