325/60R20 is 35.4 inches tall and 12.8 wide. The tire size formula, a chart of 24 off-road sizes in inches, speedometer error and regearing…
Tires & Wheels
Showing 373–384 of 2982 resultsSorted by popularity
-
-
Jacks
Safe Jack Bottle Jack Recovery Kit without 20 Ton Bottle Jack – 37M-BJRK-20
- Safe Jack Bottle Jack Recovery Kit, part number S/J37M-BJRK-20
- Universal fit lifting kit for use with a 20 ton bottle jack
- The 20 ton bottle jack is not included
- Optional Universal Bottle Jack Base (97M-UBB) and Stabilizer (97M-UBS)
SKU: S/J37M-BJRK-20 -
-
Wheels
Rugged Ridge XHD Wheel, 20x9 with 5 on 5 Bolt Pattern – Satin Black – 15306.01
- Rugged Ridge XHD 20×9 split spoke wheel, part number RUG15306.01, satin black finish
- 5 on 5 bolt pattern, 72 center bore, -12mm offset, 4.53 inch backspacing
- Hub-centric design with UV-treated polished center cap included
- No vehicles are listed; the wheel is labeled universal fit
SKU: RUG15306.01 -
Wheels
Rugged Ridge XHD Wheel, 20x9 with 5 on 5 Bolt Pattern – Gunmetal Gray – 15306.02
- Rugged Ridge XHD 20×9 split spoke wheel, part number RUG15306.02, gunmetal finish
- 5 on 5 bolt pattern, 72 center bore, -12mm offset, 4.53 inch backspacing
- Hub-centric design per the manufacturer, with UV-treated polished center cap included
- No vehicles are named for this wheel; it is labeled universal fit.
SKU: RUG15306.02 -
Wheels
Rugged Ridge XHD Wheel, 18x9 with 5 on 5 Bolt Pattern – Satin Black – 15305.01
- Rugged Ridge XHD 18×9 wheel, part number RUG15305.01
- 5 on 5 bolt pattern, satin black finish
- Designed for the 2007-2017 Jeep Wrangler (JK)
- -12mm offset, 4.53 inch backspacing, limited lifetime structural warranty
SKU: RUG15305.01 -
Wheels
Rugged Ridge XHD Wheel, 17x9 with 5 on 5 Bolt Pattern – Gunmetal Gray – 15301.30
- Rugged Ridge XHD 17×9 hub-centric wheel, part number RUG15301.30
- 5 on 5 bolt pattern, gunmetal gray finish
- Stainless steel button-head cap screws and optional trim ring
- Fitment is not one clear model match; confirm year and model
SKU: RUG15301.30 -
Wheels
Rugged Ridge Jesse Spade 17x9 Wheel with 5 on 5 Bolt Pattern – Satin Gun Metal – 15303.92
- Rugged Ridge Jesse Spade 17×9 split spoke wheel, part number RUG15303.92
- 5 on 5 bolt pattern, -12 mm offset, 4.53 inch backspacing
- 71.5 mm center bore, hub-centric design
- Satin gun metal finish with valve stem pockets
SKU: RUG15303.92 -
Wheel Spacers and Adapters
Rugged Ridge 5x5.5 Bolt Pattern 1.5″ Wheel Spacers (Black) – 15201.09
- Rugged Ridge 1.5-inch black aluminum wheel spacer, part number RUG15201.09
- Bolt pattern: 5 on 5.5
- Includes 10 grade-8 wheel studs and 10 lug nuts
- Double anodized black finish
- Universal Fit, with no specific vehicle tied to it
SKU: RUG15201.09 -
-
-
Start with the tire
Tire choice drives everything else, so settle it first. All-terrain tires suit trucks that spend most of their miles on pavement with regular dirt roads and light trails. Mud-terrain tires have deeper, more widely spaced lugs that clear mud and grip rock, but they are louder and wear faster on the highway. Hybrid or rugged-terrain designs sit between the two. Look at the load range and ply rating too: heavier trucks and trailer towing call for an LT-metric tire with a higher load range.
Reading tire and wheel sizes
A size such as 35x12.50R18 means a roughly 35 inch overall diameter, a 12.5 inch tread width, radial construction, and an 18 inch rim. Metric sizes like LT265/65R17 express width in millimeters and sidewall height as a percentage of that width. Convert between the two before comparing, because a tire listed in inches can be taller than it looks. Wheel listings add diameter, width, offset, backspacing, center bore, and bolt pattern, and every one of those needs to match your vehicle.
- Bolt pattern: lug count and circle diameter, such as 5 on 4.5 or 8 on 6.5. It must match the hub exactly.
- Offset and backspacing: these set how far the wheel and tire sit in or out. Too much poke can rub fenders and stress bearings.
- Center bore: the wheel bore must fit the hub, or the wheel needs hub-centric rings.
- Load rating: the wheel and tire should each carry the axle weight of your loaded vehicle.
Fit, clearance, and gearing
Larger tires change more than appearance. Taller tires lower your effective gear ratio, can throw off the speedometer, and may call for re-gearing on heavier trucks. Check clearance at full steering lock and at full suspension compression, since rubbing often appears only when the suspension is flexed. A leveling kit, lift, trimmed fender liners, or fender flares may be needed for bigger sizes. Spacers and adapters can correct a clearance or bolt pattern problem, but use quality hub-centric parts and verify stud length.
Installation and care
Have wheels mounted and balanced by a shop that can handle your tire size, and tighten lug nuts to the vehicle manufacturer's torque specification in a star pattern. Recheck torque after the first 50 miles or so. Tire pressure monitoring sensors may need to be moved or reprogrammed. Rotate tires on a regular schedule, and consider a full-size spare that matches your set. Lift, tire size, and wheel offset rules vary by state, so check local regulations.
Always confirm fitment for your exact year, make, and model against the manufacturer's specifications before choosing a size.
Mistakes to avoid
The most common error is buying on looks alone. Confirm that the wheel's load rating covers your vehicle's axle weight, because some decorative wheels are rated lighter than heavy trucks need. Do not assume a wheel that bolts on is hub-centric, and never rely on lug nuts to center a wheel with a larger bore. Check that your lug nuts match the seat type of the new wheel, since conical, ball, and flat seats are not interchangeable. Beware of mixing tire sizes or tread patterns between axles on four-wheel-drive vehicles, since differing rolling diameters strain the transfer case and differentials. Finally, mount a tire only on a wheel width within the tire maker's approved range, which is listed for each tire size.
Related guides
- 325/60R20 in Inches: Tire Size Math Made Simple
Popular Tires & Wheels brands
- FUEL Off-Road (636)
- Method Race Wheels (417)
- Pro Comp Alloy Wheels (357)
- Toyo Tires (212)
- Mickey Thompson (192)
- Gorilla Automotive (139)
- BF Goodrich Tires (125)
- Super Swamper Tires (113)
- Pro Comp Steel Wheels (82)
- Nitto (80)
- Raceline Wheels (72)
- Falken (71)
Shop Tires & Wheels by type
- Wheels (1,731)
- Tires (972)
- Tire & Wheel Accessories (261)
Tires & Wheels FAQ
What is the difference between all-terrain and mud-terrain tires?
All-terrain tires balance on-road manners with light off-road traction. Mud-terrain tires use larger, more open tread blocks that clear mud and bite on rock, but they usually run louder and wear faster on pavement. Pick based on where you spend most of your miles.
How do I find my vehicle's bolt pattern?
The bolt pattern is the lug count and the circle diameter they sit on, such as 5 on 4.5 inches. It is listed in your owner's manual and by the manufacturer. A mismatched pattern will not seat safely, so confirm it before choosing wheels.
Will bigger tires affect my speedometer?
Yes. A taller tire covers more ground per revolution, so the speedometer reads lower than your true speed. The odometer is affected too. Many owners recalibrate with a programmer or the vehicle's computer, and heavier trucks often benefit from re-gearing.
Do I need a lift to fit larger tires?
Often, yes, though it depends on the vehicle and the tire. Small increases may fit with a leveling kit or trimming, while 35 inch and larger tires usually need added suspension height. Check clearance at full steering lock and full compression.












