Overview
The Rugged Ridge XHD wheel, part number RUG15306.01, is a 20×9 aluminum split spoke wheel in satin black for Jeep off-road vehicles. It runs a 5 on 5 bolt pattern with a 72 center bore, a -12mm offset and 4.53 inch backspacing.
The XHD line is hub-centric, so the wheel centers over the hub and keeps proper clearance for brake rotors, steering components and suspension. That centering helps reduce wheel vibration. It is intended for 2007 to 2019 Wranglers and Gladiators, so verify the match before fitting.
Key features
- Satin black powder coated finish.
- Split spoke design with stainless steel button-head socket cap screws around the outer face for a 3-piece appearance
- Hub-centric design, per the manufacturer, with a 72 center bore
- Polished, UV-treated center cap that mimics a manual hub
- Optional trim ring available for accessorizing
- Independently tested to meet or exceed SAE J2530 wheel strength and durability standards
- Limited lifetime structural warranty and 1 year finish warranty
Caring for satin black finish
Satin black powder coating has a low-gloss surface that hides some dust but shows scratches and scuffs from rocks, so care is mainly about gentle cleaning. Use mild soap, water and a soft brush or microfiber cloth, and rinse thoroughly after off-road trips where mud and grit collect around the spokes and lip. Dry the wheel afterward to reduce water spots.
Avoid abrasive pads, strong solvents and high-pressure spray held close to the finish, since these can dull or lift the coating. Inspect the lip and the edges of the split spokes after hard trail use for chips, and touch them up before corrosion can start under the coating. Keep the center cap clean as well, since grit can collect under its edge.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG15306.01 |
| Series | XHD |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -12mm |
| Backspacing | 4.53 inch |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Fit type | Universal fit |
Vehicle fitment
No vehicles are named for this wheel, and it is labeled universal fit. The 2007 to 2019 Wrangler and Gladiator years cover more than one model range, so match your chassis and years against the 72 center bore and -12mm offset before choosing it.
The wording does not single out a Wrangler generation or a Gladiator year, so do not assume a fit from the Jeep name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 72 center bore must suit your hub before mounting, because the hub-centric design depends on it. Lug nut torque should follow the torque specification for your vehicle, since a wheel under load relies on that clamping force.
What’s included
Each wheel includes a UV-treated polished center cap.
Not included: the optional trim ring and tires.
















