Overview
The Rough Country 2 inch wheel spacer, part number R/C1095RED, is a red aluminum spacer for an 8 on 6.5 bolt pattern that supports 14mm x 1.5 studs. It offsets the wheel from the suspension, which allows a wider tire and a more aggressive look. It does not fit dually models.
The spacer is made of 6061-T6 aluminum that resists corrosion. No year, make, model or trim is named, so fit depends on the 8 on 6.5 bolt pattern, the 14mm x 1.5 stud size and the dually restriction. Check all three before fitting.
Key features
- 2 inch spacer thickness
- 8 on 6.5 bolt pattern for 8-lug wheels
- Supports 14mm x 1.5 studs
- 6061-T6 aluminum, corrosion resistant
- Red finish
- Does not fit dually models
Stud size and thread engagement
Studs are the link between a spacer and the hub, so their size and thread type matter as much as the spacer itself. A stud that is too short will not engage the lug nut fully, and one that is too long can bottom out before the nut seats. Check both ends of the stud and the lug nut thread before mounting.
A 2 inch spacer also changes the position of the brake caliper and the tire relative to the fender. Look for rub at full lock and check the caliper bracket for clearance. Inspect the spacer face and hub seat for corrosion each time the wheels come off.
- Confirm stud length before fitting
- Check the lug nut seats fully on the spacer
- Inspect for rub at full steering lock
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1095RED |
| Type | Spacer |
| Thickness | 2 inch |
| Bolt pattern | 8 on 6.5 |
| Stud size | 14mm x 1.5 |
| Material | 6061-T6 aluminum |
| Color | Red |
| Dually models | Not compatible |
Vehicle fitment
No vehicle is named for this spacer. Check that your truck is not a dually, and that its 8 on 6.5 bolt pattern and 14mm x 1.5 studs match the spacer. A spacer changes the wheel’s offset, which affects steering and wheel bearing load, so review that for your model before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 14mm x 1.5 studs match your hub, then check brake caliper clearance. A 2 inch spacer changes how the tire sits, so check for rub at full lock after installing.
What’s included
Plan on checking that studs and lug nuts suit the 14mm x 1.5 stud size before mounting.









