Overview
The Rugged Ridge XHD wheel, part number RUG15306.02, is a 20×9 aluminum split spoke wheel in gunmetal finish for Jeep off-road builds. It uses a 5 on 5 bolt pattern, a 72 center bore, a -12mm offset and 4.53 inch backspacing.
The wheel is hub-centric, so it centers exactly over the hub, which supports a better fit, proper clearance for brake rotors, steering components and suspension, and less wheel vibration. It is intended for 2007 to 2019 Wranglers and Gladiators, so confirm the year and model match before use.
Key features
- Hub-centric design that centers the wheel over the hub
- Split spoke face with stainless steel button-head socket cap screws around the outer rim for a 3-piece look
- Accepts an optional trim ring for added accessorizing, which is not included
- UV-treated polished center cap that replicates a manual hub
- Gunmetal finish.
- Independently tested and certified to meet or exceed SAE J2530 wheel strength and durability standards, per the manufacturer
- Limited lifetime structural warranty and 1 year finish warranty, with coverage limits set out in the warranty terms
Fitment checks for hub-centric wheels
Hub-centric wheels rely on the center bore to locate them on the hub, so the bore has to match the hub closely for the wheel to run true. Lug nuts then clamp the wheel in place rather than carrying the centering job alone. A wheel with a bore that is too large or too small can vibrate or sit off-center even when the lug nuts are tight.
Before mounting, check the wheel’s offset and backspacing against your brake calipers, control arms and fender. Tire size also changes clearance, so test the full steering lock and suspension travel with the tire fitted. Keep the center cap in place for a clean finish and to keep dirt out of the hub area.
- Test-fit one wheel before mounting the full set
- Check brake caliper clearance with the tire fitted
- Recheck lug nut torque after the first drive
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG15306.02 |
| Series | XHD |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -12mm |
| Backspacing | 4.53 inch |
| Style | Split spoke |
| Finish | Gunmetal |
| Construction | Aluminum |
| Fit type | Universal fit |
Vehicle fitment
No vehicles are named for this wheel, and it is labeled universal fit. The 2007 to 2019 Wrangler and Gladiator years span more than one model range, so compare your chassis and years with the 72 center bore and -12mm offset before choosing it.
Wrangler generations differ, so compare your chassis code, such as JK or JL, against the model years before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the wheel is hub-centric, the 72 center bore must suit your hub or the wheel will not center properly. Wheels carry the full weight of the vehicle, so tighten lug nuts to the torque specification for your vehicle after mounting.
What’s included
Each wheel includes a UV-treated polished center cap that replicates a manual hub.
Not included: tires and the optional trim ring.














