Overview
The Rugged Ridge XHD wheel, part number RUG15301.30, is a 17×9 split spoke aluminum wheel in gunmetal gray with a 5 on 5 bolt pattern. It is hub-centric, so the wheel centers over the hub. The hub design is built around 2007-2019 Wranglers and Gladiators, and Gladiator model years start in 2020, so confirm your exact year and model before fitting.
The XHD is a custom wheel design for Jeeps. Its hub-centric fit is intended to avoid wheel vibration and give proper clearance for brake rotors, steering components and suspension. It is designed for SAE J2530 wheel strength and durability.
Key features
- Hub-centric design that centers the wheel over the hub
- Stainless steel button-head socket cap screws around the outer face for a three-piece look
- Optional trim ring for added styling
- Polished center cap that replicates a manual hub
- Powder coated finishes and a dual-stage polished chrome option
- Tested to SAE J2530 standards, per the brand
Hub-centric fit and vibration
Hub-centric wheels transfer their load through the center bore, and the lug nuts mainly clamp the wheel. If the bore does not match the hub, the wheel can sit off center and cause vibration at speed. Confirm the hub size before mounting, and use hub rings only when the bore is larger than the hub.
Split spoke wheels with a three-piece look often have exposed fasteners on the outer face. Check these fasteners for tightness after the first few drives, and keep the trim ring and center cap clean so they seat correctly. Inspect the barrel after trail use for dents near the bead.
- Confirm hub bore against the wheel center bore
- Check outer face fasteners after the first drive
- Keep center cap seated and clean
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG15301.30 |
| Series | XHD |
| Style | Split Spoke |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -12mm |
| Backspacing | 4.53 inch |
| Finish | Gunmetal gray |
| Construction | Aluminum |
| Strength standard | SAE J2530, tested and certified per the brand |
| Warranty | Limited lifetime structural warranty and 1 year finish warranty |
| Design patent | US Patent No. D761,183 |
Vehicle fitment
The hub is built for 2007-2019 Wranglers and Gladiators, and Gladiator (JT) model years start in 2020. Confirm your exact year and model before fitting.
Cherokee, Grand Cherokee and other Jeep models are not covered by this wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hub-centric fitment depends on the hub bore matching the wheel’s 72 center bore, so confirm the hub size before mounting. Check brake rotor, steering and suspension clearance, especially with the -12mm offset and 4.53 inch backspacing.
What’s included
Each wheel comes with a UV-treated polished center cap that replicates a manual hub. The optional trim ring is not included.













