Overview
The Rough Country spare tire spacer, part number R/C1053, is a black steel spacer that carries a spare tire up to 33in. It is made from 1/4-inch plate steel and bolts on to carry the spare.
The spacer is laser cut and robot welded for a precise fit and installs with 100% bolt-on hardware. It fits the Wrangler models covered in the fitment section below. Its steel build is designed for durability.
Key features
- 1/4-inch plate steel construction
- Laser cut and robot welded for a precise fit
- 100% bolt-on installation
- Carries spare tires up to 33in, per the brand
- Black finish
- Direct fit for the listed Wrangler models
Carrying a spare on the rear
A rear-mounted spare changes how the vehicle carries weight. The spare sits at the back, so a spacer moves the wheel outward and shifts load onto the tailgate, hinge and mount. Owners who run larger tires often find the spare clears bumpers and rear body panels differently than the stock tire did.
When choosing a spacer, match it to the spare’s diameter and width, and to the bolt pattern on your rack. Check tailgate clearance with the spare fully installed, then open and close the tailgate several times. Hardware such as the spare mounting bolts and carrier fasteners is often replaced at the same time when a mount is refreshed.
Inspect the mount periodically for cracked welds, loose bolts and rust at the contact points. Road vibration can back bolts off, so retorque them after the first trail runs. Signs the mount is wearing include rattling over bumps, a spare that sits off square, or visible flex in the steel plate.
- Tailgate and bumper clearance with the spare mounted
- Spare tire diameter and width
- Mounting bolt condition and torque
- Rust at the spacer contact points
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1053 |
| Type | Spare tire spacer |
| Material | Steel, 1/4-inch plate |
| Finish | Black |
| Spare tire size | Up to 33in |
| Construction | Laser cut and robot welded |
| Installation | 100% bolt-on |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list names these Jeep Wrangler models:
- 2007-2018 Jeep Wrangler (JK), 2-door and Unlimited 4-door trims including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X
- 2004-2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon
- 1997-2006 Jeep Wrangler (TJ), 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X
- 1987-1995 Jeep Wrangler (YJ), Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport
Vehicles outside this list are not covered, including Wrangler JL, Gladiator JT, Cherokee XJ and Grand Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on. Confirm the spare tire clears the spacer and its mount, and check the spare’s overall size against the 33in limit before driving. Recheck the mounting bolts after the first drive, since the spare adds weight at the rear.
What’s included
Check the package contents against your installation before starting.









