Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9559, is a gas-charged monotube shock for the front of light trucks, Jeeps and SUVs. Skyjacker designed it for vehicles with a 5 in. lift, mounted forward of the axle. Its listed fitment covers Ford F-series trucks, the Ford Bronco and the 1987–1995 Jeep Wrangler YJ.
The single-tube design is intended to keep operating temperatures cooler under extreme conditions. It uses high pressure nitrogen gas with floating piston technology for quick response. Each unit is sold as each, meaning one shock absorber.
Key features
- Single-tube monotube design, which Skyjacker says helps operating temperatures stay cooler under extreme conditions
- High pressure nitrogen gas charge with floating piston technology
- Internal bump stop
- 180 degrees directional mounting
- Large 46mm bore
- Designed for a 5 in. lift with mounting forward of the axle
Matching the shock to your lift
A shock designed for a fixed lift height works best when the suspension is set to that height. Forward-of-axle mounting also changes how the damper loads the mount, so the upper and lower bracket positions matter. Before fitting, confirm the lift and the mounting position on your truck match the design.
Directional shocks have a defined orientation, typically shown by markings or port location. Installing one backward can change how the valving responds during compression and rebound. Check the body markings before tightening the mounts, and inspect the bushings for wear while the old unit is off the truck.
- Confirm lift height and axle position
- Check directional markings on the body
- Inspect bushings and mounts for cracks
- Replace worn hardware with the shock
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9559 |
| UPC | 803696211589 |
| Shock series | M95 Performance |
| Shock type | Nitro gas monotube, gas charged |
| Position | Front |
| Bore size | 46 mm |
| Bump stop | Internal |
| Mounting | 180 degrees directional |
| Lift height | 5 in. lift, mounted forward of axle |
| Sold as | Each |
Vehicle fitment
It fits the following vehicles:
- 1970–1976 Ford F-100
- 1977–1979 and 1997–2003 Ford F-150
- 1977–1979 Ford F-250
- 1979 Ford F-350
- 1978–1979 Ford Bronco
- 1987–1995 Jeep Wrangler (YJ)
Wrangler TJ, LJ and JK models, and Ford F-series years outside the ranges above, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed 5 in. lift height and forward-of-axle mounting are part of this shock’s design, so confirm your suspension lift and mounting position match before fitting. The 180 degrees directional mounting means the shock should be oriented as specified during installation.
What’s included
Sold as each: one Skyjacker M95 Performance monotube shock absorber. Check the package contents against your installation before starting.









