Select your vehicle

Skyjacker M95 Performance Monotube Shock Absorber – M9557

Skyjacker

$112.97Usually ships within 6 to 7 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 7:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Skyjacker M95 gas monotube front shock, part number M9557
  • Suits 4 – 8 in. lift
  • Covers 1980–1996 Ford Bronco and F-150 models only
  • Gas charged, 46mm bore, internal bump stop

Description

Overview

The Skyjacker M95 M9557 is a front gas monotube shock absorber for 4 to 8 in. lifts. It fits 1980–1996 Ford Bronco and F-150 models, with the trims named in the vehicle fitment section. Because coverage is narrow, compare your truck closely before choosing this unit.

Single-tube gas monotube dampers are built to keep operating temperatures lower in hard use. The 46mm bore and internal bump stop are part of the same design.

Key features

  • Front-position shock absorber
  • Gas-charged monotube design
  • Internal bump stop
  • 46mm bore and 180-degree directional mounting
  • Suits a 4 – 8 in. lift

Checking lift and shock length

A front shock has to match the travel of the suspension it sits in. When a lift raises the truck, the shock is pulled to a longer position at rest, and the rod must still have room to compress and extend without bottoming out. Confirming the lift height before buying avoids a shock that runs out of travel.

Front shocks on trucks are often replaced alongside other worn parts. Check the control arm bushings and the bump stops, since a worn stop can let the shock take impacts it was not built for. Fresh shocks also work best when the steering and tires are in good condition.

  • Measure your lift before choosing a shock length
  • Check control arm bushings for wear
  • Inspect bump stops and upper mounts

Specifications

Brand Skyjacker
Shock series M95 Performance
Part number M9557
UPC 803696211541
Position Front
Charge Gas
Lift height 4 – 8 in.
Bore 46mm
Mounting 180-degree directional
Sold as Each

Vehicle fitment

Skyjacker lists M9557 for 1980–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport) and 1980–1996 Ford F-150 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat).

Bronco II, Ranger and F-250 models are not part of this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

It is a single front shock, sold as each.

SKU: SKYM9557 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 24.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford Bronco1980–1996Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport
Ford F-1501980–1996Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Ford trucks fit the Skyjacker M9557?

The M9557 fits 1980–1996 Ford Bronco and F-150 models, including trims such as XLT, Lariat and Eddie Bauer. Other Ford models are not covered, so check your year and trim before ordering.

Does the M9557 work on a 4 to 8 in. lift?

The M9557 is written for a 4 - 8 in. lift, so match your lift height to that range before fitting. Confirm mounting position with your installer.

Is this a rear shock?

No. Part M9557 is listed with Position Front, so it is a front shock absorber with a gas monotube design.

What happens if a shock has too little travel for the lift?

It can reach the end of its travel quickly, leaving the suspension stiff and the ride harsh. Bottoming out also puts extra load on the mounts, which can loosen bolts and damage bushings over time.

Should the bump stops be checked when fitting a new shock?

Yes. Inspect the bump stops and the rod seal on the old shock to see how the truck has been working. Check that the new unit's rod moves smoothly before installing it.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon