Suspension
Showing 6229–6240 of 7279 resultsSorted by popularity
-
-
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-020770
- Rear 4600 Series monotube gas-charged shock for the 1987–1995 Nissan Pathfinder
- Pathfinder trims listed: E, LE, SE and XE
- Part number 24-020770, UPC 651860606767
- Boots included; use with special springs and anti-sway bars
SKU: BIL24-020770 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-020435
- Rear 4600 Series gas-charged monotube shock, part number 24-020435
- 2 in body diameter, yellow finish, boots included, no reservoir
- Lift height 0 in. lift/drop
- No vehicle fitment listed; confirm your application before ordering
SKU: BIL24-020435 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-018197
- Fits 2003–2005 Chevrolet Blazer (ZR2) and 1994–2003 Chevrolet S10 (ZR2) per the manufacturer fitment list
- 46mm monotube gas-charged design with heavy duty build
- Yellow finish, 4600 Series shock
- Part number 24-018197, UPC 651860642772
SKU: BIL24-018197 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-017985
- Fits 1994–2001 Jeep Cherokee (XJ) and 1993–1998 Jeep Grand Cherokee (ZJ) per the manufacturer fitment list
- Front position, direct fit 46mm monotube gas-charged shock
- Heavy duty 4600 Series build in yellow
- Part number 24-017985, UPC 651860612218
SKU: BIL24-017985 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-017954
- Bilstein 4600 Series rear shock absorber, part number 24-017954
- Fits the 1992–1999 Mitsubishi Montero in Base, LS, RS and SR trims
- Gas-charged monotube with a 2 in body diameter and yellow finish
- No reservoir; boots included
SKU: BIL24-017954 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-016988
- Bilstein 4600 Series rear shock absorber, part number 24-016988
- Heavy duty gas-charged monotube with a 2 in body diameter
- Yellow finish, no reservoir, boots included
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: BIL24-016988 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-016971
- Front shock for the 1988-2000 Chevrolet C1500, C2500, C3500 and GMC C-series trucks
- Bilstein 4600 Series monotube, gas charged, yellow
- 2 inch body diameter, boots included, no reservoir
- For stock height (0 in. lift or drop)
SKU: BIL24-016971 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-013291
- Bilstein 46mm monotube rear shock absorber, part number 24-013291
- Heavy duty gas charged design, yellow finish, lift/drop 0 in
- Fits Ford F-150 (1985–1996), F-250 (1980–1996, 1998), F-250 HD (1997), F-350 (1980–1997) and F-350 Super Duty (1999–2016)
- Old part numbers BILF4-B46-1329-H1 and BILF4-B46-1329-H2
SKU: BIL24-013291 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-013284
- Bilstein 4600 Series front shock absorber, part number 24-013284
- Gas-charged monotube design with a 2 in body diameter
- Confirm fit for your year, make, model and trim before ordering
- Yellow finish, no reservoir, boots included
SKU: BIL24-013284 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-013093
- Bilstein 24-013093 front 4600 Series shock absorber, precision formed body
- Manufacturer list covers 1987-1995 Jeep Wrangler (YJ)
- Chrome plated, induction hardened steel shaft and high quality seals
- Limited lifetime warranty stated by Bilstein
SKU: BIL24-013093 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-011402
- Bilstein 46mm monotube rear shock absorber, part number 24-011402
- Fits 1984–1989 Toyota 4Runner (DLX, SR5) models
- Also fits 1984–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo) models
- Heavy duty, gas charged, yellow finish
- Old part number BILF4-B46-1140-H2
SKU: BIL24-011402
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.











