Overview
The Bilstein 24-020435 is a rear gas-charged monotube shock absorber from the Bilstein 4600 Series, with a 2 in body diameter, a yellow finish and boots included. It is sold as a direct-fit rear shock with a lift range of 0 in. lift/drop, so the part number is the first thing to match when you compare it with an existing shock.
The monotube design moves heat from the damping oil outward through the shock body, where it dissipates more efficiently. A dividing piston lets the oil expand as it warms, which prevents foaming and viscosity loss so full damping is kept as temperatures climb. That matters most on long grades and rough trail sections where the shock works without a break.
Key features
- Gas-charged monotube construction that carries heat from the oil out through the shock body
- Dividing piston allows the oil to expand with heat, which Bilstein says prevents aeration and viscosity loss
- Tube produced by a special extrusion method, with a tight peak-to-valley tolerance and consistent wall thickness
- Seamless monotube design intended to add tube strength and extend shock life
- Piston head tunes compression and rebound damping independently for ride comfort and control
- Digressive design with fewer parts than conventional twin-tube and road-sensing shocks
Rear shock selection tips
A rear shock works as part of the whole rear suspension, so choosing one starts with knowing how the vehicle is used. A gas-charged monotube suits sustained work because heat leaves the oil more easily, while the dividing piston handles oil expansion. Before buying, compare the rear mount style and lift setting with the shock you are replacing, since those two points decide whether the new unit lines up correctly.
Good habits extend shock life. Keep the body clean, check the boots for tears and inspect the mounts at each service. Worn springs and bushings can load the shock unevenly, so check them when the shock is out. Replacing both rear shocks together keeps the ride balanced.
- Match the rear mount style to your truck
- Compare lift setting with the old shock
- Keep the body and boots clean
- Replace both rear shocks together
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-020435 |
| UPC | 651860417493 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, make, model and trim before choosing this rear shock, since no year, model or chassis code is named for it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Bilstein 24-020435 rear shock absorber with boots.
Not included: The shock comes without a reservoir. Check your installation needs for mounting hardware and other components before starting.









