Overview
The Bilstein 24-017954 is a rear shock in the 4600 Series, made for the 1992–1999 Mitsubishi Montero in Base, LS, RS and SR trims. It is a gas-charged monotube with a 2 in body diameter and a yellow finish, and it is a direct fit.
Bilstein explains that heat from the damping oil passes through the outer wall of the shock body and dissipates there. The dividing piston lets the oil expand as it warms, which the company says avoids aeration, meaning foaming, and the loss of viscosity that would weaken damping.
The seamless monotube tube is extruded to a tight tolerance, and the piston head tunes compression and rebound damping separately. The piston arrangement uses fewer parts than many conventional twin tube and road sensing shocks, which supports long shock life. Boots are included.
Key features
- Rear position shock in the Bilstein 4600 Series
- Gas-charged monotube with a 2 in body diameter
- Dividing piston that lets oil expand as temperatures rise
- Heat moves from the oil to the outer shock body
- Extruded tube said to hold consistent wall thickness
- Separately tuned compression and rebound damping
- Boots included
Choosing a rear shock
A rear shock controls how the axle moves over bumps and during braking, so it affects ride and stability more than many owners expect. Worn units often feel bouncy over swells or make a knock over small bumps. On a Mitsubishi Montero, the rear shocks also carry load, which makes the gas charge and internal design important over long periods of use. A monotube body keeps the damping fluid and gas in separate chambers, which helps the unit hold steady as it warms on long grades.
Replacing rear shocks in pairs keeps ride height and damping even from side to side. Before you remove the old unit, check the mounting eyes, bushings and boots for cracks, leaks or looseness. Clean the mounting surfaces so the bolts seat properly, and recheck fasteners after the first few drives.
- Replace both rear shocks on the same axle
- Inspect bushings for hardening or splits
- Look for an oil film on the shock body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-017954 |
| UPC | 651860612362 |
| Shock series | 4600 Series |
| Position | Rear |
| Body diameter | 2 in |
| Type | Monotube |
| Gas charge | Gas charged |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift height | 0 in. (no lift or drop) |
Vehicle fitment
The manufacturer fitment list for this rear shock covers the 1992–1999 Mitsubishi Montero in Base, LS, RS and SR trims. Model years outside 1992 to 1999 and other Mitsubishi models are not on that list.
Other years and other Mitsubishi models are not covered by this list, so do not assume a fit from the model name alone. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included.
Not included: Check the package contents against your installation before starting, including any mounting hardware you need.









