Overview
The Bilstein 24-018197 is a 46mm monotube shock absorber for the 2003–2005 Chevrolet Blazer (ZR2) and the 1994–2003 Chevrolet S10 (ZR2). It has a heavy duty build, a yellow finish and a gas-charged body. Confirm fit for your vehicle’s year, model and trim before ordering.
The gas-charged monotube layout moves heat from the oil into the outer shock body, where it dissipates more efficiently than in a twin tube. A dividing piston gives the fluid room to expand as it warms, so the shock keeps full damping on steep grades or rough trails. Check the position and lift height against your application before fitting.
Key features
- Gas-charged monotube body that sends oil heat into the outer shock housing
- Dividing piston lets fluid expand as temperatures rise, reducing foaming and thinning
- Seamless monotube made by a special extrusion method for tight peak-to-valley tolerance and consistent wall thickness
- Piston head design lets compression and rebound damping be tuned separately
- Fewer parts than most conventional twin tube and road sensing designs
- Heavy duty construction with a yellow finish
Blazer and S10 ZR2 suspension care
ZR2 trucks are used on rough terrain, and that work puts repeated heat and impact into the shocks. A monotube design with a dividing piston manages oil expansion, so damping stays steadier on long descents and across washboard sections. The shocks work together with the springs, bump stops and tires, so a worn component elsewhere can shorten the life of a good shock.
After a hard trail day, look over the shock bodies and mounts. Clean off mud that could hide oil leaks, check the eyes for cracks and make sure the upper hardware is snug. Replacing both shocks on the same axle keeps the truck handling evenly on the trail and the road.
- Clean mud off the body to spot leaks
- Check mounts and eyes for cracks
- Inspect bump stops and springs
- Replace shocks in pairs on the same axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-018197 |
| UPC | 651860642772 |
| Former part number | BILF4-B46-1819-H2 |
| Shock series | 4600 Series |
| Body style | 46mm monotube shock absorber |
| Gas type | Gas charged |
| Fitment type | Direct fit |
| Finish | Yellow |
| Duty | Heavy duty |
Vehicle fitment
The manufacturer fitment list for 24-018197 covers the 2003–2005 Chevrolet Blazer (ZR2) and the 1994–2003 Chevrolet S10 (ZR2). No separate trims are given for either entry, so the ZR2 designation is the only detail in the list.
Other Blazer and S10 model years, along with Tahoe and GMC models, fall outside the fit range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the packing contents on arrival, including any mounting hardware, against your installation.









