Overview
The Bilstein 24-017985 is a front 46mm monotube gas-charged shock absorber from the 4600 Series, built as a direct fit replacement for the 1994–2001 Jeep Cherokee (XJ) and the 1993–1998 Jeep Grand Cherokee (ZJ). It is a heavy duty unit with a yellow finish, aimed at owners who want a damper that keeps its character on rough roads and trails.
The monotube body is designed to move heat out of the working oil. Heat passes to the outer surface of the shock body and dissipates more efficiently than it would in a twin tube design. A dividing piston lets the oil expand as it warms, so the damping stays consistent when temperatures climb during long descents or repeated hard hits. The tube itself is formed by a special extrusion method that keeps wall thickness even, which supports long service life.
Key features
- Gas-charged monotube body that carries oil heat to the outer shock surface
- Dividing piston lets the oil expand as it heats, limiting aeration (foaming) and viscosity loss
- Seamless monotube formed by a special extrusion method for tight peak-to-valley tolerance
- Piston head allows compression and rebound damping to be tuned independently
- Fewer parts than most conventional twin tube and so-called road sensing shock designs
- Front position for the front suspension application
- Direct fit listing with a stock-height lift/drop rating of w/0 in.
- Heavy duty build in a yellow finish
Before you buy
Before buying a replacement shock, compare the mounting eyes, collapsed length and stroke with the unit being removed. A stock-height shock is meant to match the factory ride height, so the new damper should sit at the same angle as the old one. Heavy duty builds often run firmer, which suits trail or towing use but can feel harsher on pavement.
Gas-charged monotube shocks are easiest to judge when they are checked as a pair. Replacing both front shocks together keeps damping even from side to side. Inspect the upper and lower bushings and the boots as well, since worn rubber lets the shaft move off line and wears the seals.
Keep the shock upright and free of mud during storage, and avoid heating the body. Signs of wear include oil on the outer tube, a bouncy feel after bumps and uneven tire wear along the front edge.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-017985 |
| UPC | 651860612218 |
| Former part number | BILF4-B46-1798-H1 |
| Shock series | 4600 Series |
| Body style | 46mm monotube |
| Gas type | Gas charged |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop (stock height) |
| Finish | Yellow |
| Duty | Heavy duty |
Vehicle fitment
The manufacturer fitment list for 24-017985 covers the 1994–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, and the 1993–1998 Jeep Grand Cherokee (ZJ) in 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims. Both entries are for the front position.
It fits the 1994–2001 Jeep Cherokee (XJ) and the 1993–1998 Jeep Grand Cherokee (ZJ) only. For other Jeep models, including the Wrangler (YJ), Liberty (KJ) and later Grand Cherokee (WJ), check the year, model and trim against your vehicle before buying.
What’s included
The shock absorber is the main item. Look over the package for mounting hardware and other included parts before fitting.









