Overview
The Bilstein 24-020770 is a rear 4600 Series monotube gas-charged shock absorber for the 1987–1995 Nissan Pathfinder (E, LE, SE and XE). It has a 2 in. body diameter, a yellow finish and boots included, and it is a direct fit unit with 0 in. of lift or drop.
This shock is made to push the suspension toward higher performance for drivers who want firmer control. It is meant for use with special springs and anti-sway bars.
Key features
- Built for performance-minded drivers
- Intended for use with special springs and anti-sway bars
- Gas-charged monotube body in the 4600 Series
- Boots included with the shock
- Yellow finish, 2 in. body diameter
Springs, sway bars and shock tuning
A shock controls how fast the spring moves, so the shock and spring work as one system. Changing the spring rate or adding an anti-sway bar alters body roll and how the damper responds to bumps. A performance-oriented shock is most effective when the spring and sway bar setup has been matched to it, which is why the combination should be planned before installation.
Once the parts are in, check the mounts, the bushings and the sway bar links for wear. Loose links or worn bushings can make a good shock feel harsh or sloppy. Keep the body clean, look for oil at each service, and replace worn units in pairs on the same axle.
- Plan spring and sway bar changes together
- Check sway bar links for wear
- Inspect mounts and bushings after installing
- Replace shocks in pairs on the same axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-020770 |
| UPC | 651860606767 |
| Shock series | 4600 Series |
| Position | Rear |
| Body diameter | 2 in. |
| Type | Monotube |
| Charge | Gas charged |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Finish | Yellow |
Vehicle fitment
It fits the 1987–1995 Nissan Pathfinder in E, LE, SE and XE trims.
Other Pathfinder generations and other Nissan models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is for use with special springs and anti-sway bars, so confirm your spring and sway bar setup matches before fitting.
What’s included
Boots are included, and there is no reservoir.
Not included: Special springs and anti-sway bars are not included with this shock.








