Suspension
Showing 6013–6024 of 7279 resultsSorted by popularity
-
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-104645
- Bilstein 5100 Series front shock absorber, part 33-104645
- Listed fitment: 2000 to 2005 Ford Excursion, 1999 to 2004 F-250 and F-350 Super Duty
- Lift range w/4 – 6 in. Lift, direct fit
- Collapsed 15.91 in, extended 25.89 in, travel 9.98 in
- 16mm eye mounts at both ends, 14mm shaft
SKU: BIL33-104645 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-066868
- Bilstein 5100 Series shock absorber, part 33-066868
- Listed fitment: 1984 to 2001 Jeep Cherokee (XJ) and 1984 to 1990 Jeep Wagoneer (SJ)
- Extended 23.84 in, collapsed 14.88 in, travel 8.96 in
- Eye 16mm lower mount, bar pin upper mount
- Boot included, no reservoir
SKU: BIL33-066868 -
Shock Absorbers
Bilstein 5125 Series Shock Absorber – 33-062518
- Bilstein 5125 Series front shock absorber, part 33-062518
- Fitment not listed; check manufacturer specifications
- Extended length 18.5 in, travel 6.43 in, lift range w/0 – 2 in.
- Compression 700, rebound 2550
- Includes 1/2 inch sleeves and a boot
SKU: BIL33-062518 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-061399
- Bilstein 5100 Series shock absorber, part 33-061399, mono tube design
- Listed fitment: 1988 to 2000 Chevrolet and GMC K-series trucks, Blazer, Tahoe, Yukon
- Collapsed 14.37 in, extended 22.78 in, travel 8.41 in
- Eye 12.9mm lower and upper mounts, 14mm shaft
- Boot included
SKU: BIL33-061399 -
-
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-242379
- Fits the 2005–2018 Toyota Tacoma per the manufacturer fitment list
- Rear left position, direct fit, 0 to 1.5 in. lift range
- Gas charged mono tube design with remote reservoir
- Collapsed length 14.22 in, extended length 24.06 in, travel 9.84 in
- Upper mount kit and reservoir mount kit included
SKU: BIL25-242379 -
-
Shock Absorbers
B8 5160 Series Remote Reservoir Shock Absorber
- Bilstein B8 5160 rear remote reservoir shock absorber, part 25-240412
- Listed fitment: 2013 to 2018 Ram 3500
- Extended length 30 in, collapsed 18.33 in, travel 11.67 in
- Reservoir, 46mm ID smooth body, mono tube design
- Boot not included
SKU: BIL25-240412 -
-
-
Shock Absorbers
Bilstein 5160 Series Shock Absorber – 25-229745
- Direct fit for 2007–2018 Jeep Wrangler (JK) models
- Bilstein part number 25-229745, UPC 651860716800
- Rear, gas charged 5160 Series monotube remote reservoir shock
- Collapsed length 16.12 in (409.5 mm), extended length 27.42 in (696.5 mm)
- Zinc plated finish, 0 in lift/drop
SKU: BIL25-229745 -
Shock Absorbers
Bilstein 5160 Series Shock Absorber – 25-229738
- Front stock mount remote reservoir shock, Bilstein 25-229738, 5160 Series
- Fits 2007–2018 Jeep Wrangler (JK) and Unlimited models
- 46mm digressive piston, zinc plated finish
- Collapsed length 15.91 in., extended length 27.46 in.
SKU: BIL25-229738
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.











