Overview
The Bilstein 25-229738 is a front stock mount remote reservoir shock absorber for the 2007–2018 Jeep Wrangler JK, including Unlimited models. It is a direct fit with a 46mm digressive piston and a zinc plated finish.
Bilstein says its stock mount design lets a high performance reservoir shock run without custom fabrication, because each shock is built for a specific vehicle application. The reservoir adds cooling capacity and shock travel, which the company highlights as the main benefits of the remote design.
Key features
- Stock mount remote reservoir design, built to a specific vehicle application.
- 46mm digressive piston with self-adjusting deflective disc valving.
- The reservoir adds cooling capacity.
- Increased shock travel from the reservoir design.
- Zinc plated finish.
- Front position, direct fit.
Before you install
The reservoir sits away from the shock body, so the main installation question is where it will live under the front fender or inner structure. Check clearance to the tire, the steering components and the frame at full compression and full extension before tightening anything. Route the reservoir hose so it does not rub or kink through the full steering range.
Gas charged shocks stay pressurized, so keep heat and punctures away from the body while the unit is handled. Inspect the upper mount, lower eye and any bushings at the same time, because worn hardware can change how the reservoir sits. Work on one side at a time so the vehicle stays supported and the other side remains a reference.
- Reservoir clearance at full steering lock
- Hose routing with no kinks or rub points
- Upper mount and bushing condition
- Support the vehicle before removing the old shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-229738 |
| UPC | 651860716756 |
| Shock series | 5160 Series |
| Position | Front |
| Collapsed length | 15.91 in. (404.0 mm) |
| Extended length | 27.46 in. (697.5 mm) |
| Finish | Zinc plated |
| Piston | 46mm digressive |
| Hydraulic / gas | Gas charged |
| Fitment type | Direct fit |
| Lift height | Set up for 0 in. lift/drop. |
Vehicle fitment
The manufacturer list covers the 2007–2018 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X versions.
Wrangler JL and Gladiator models, and Wrangler years outside 2007–2018, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock mount design is meant to match the Wrangler JK front suspension, but check clearance around the reservoir before fitting. Gas charged shocks stay pressurized, so avoid heat and punctures.
What’s included
One front remote reservoir shock absorber. Compare the box contents with your mounting plan before fitting.









