Overview
The Bilstein B8 5160 Series Remote Reservoir Shock Absorber, part number 25-240429, is a front shock that fits the 2014 to 2016 Ram 2500. It is a direct fit for lifted trucks and SUVs with a w/2 – 2.5 in. lift range.
The remote reservoir sits apart from the shock body, adding cooling capacity and wheel travel compared with a traditional shock. The mono tube body is designed for consistent, fade-free damping, and its valve settings are tuned for each application.
Key features
- Remote reservoir for increased cooling capacity and wheel travel
- Mono tube body with velocity sensitive digressive valve settings
- 360 degree swivel banjo hose fitting for a low profile installation
- Zinc plated finish on a 46mm ID smooth body
Front shock setup
Front shocks do more than control bounce. On a heavy-duty truck they help steer the weight during braking and keep the front tires in contact with the road over washboard surfaces. A shock that is starting to fade will often show up as a front end that wanders or feels loose on the highway.
Remote reservoir shocks are often chosen for their extra cooling and travel, both of which matter on a truck carrying a load or towing. When comparing setups, confirm the upper and lower mount styles and the reservoir clearance against the inner fender before ordering, since space on lifted trucks can be tight.
- Check the swivel banjo fitting for free movement before tightening
- Route the reservoir hose clear of tires and steering components
- Recheck torque on the reservoir clamp after the first highway run
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-240429 |
| UPC | 651860753874 |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/2 – 2.5 in. Lift |
| Collapsed length | 15.31 in |
| Extended length | 22.68 in |
| Travel length | 7.37 in |
| Finish | Zinc plated |
| Reservoir | Yes |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Boot included | No |
Vehicle fitment
It fits the 2014 to 2016 Ram 2500. Confirm fit for your year, model and trim before buying.
The 2014 to 2016 Ram 2500 is the only vehicle named. Other Ram models are not covered by this statement. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The banjo hose fitting swivels, which Bilstein describes as allowing a clean, low profile installation. Support the front of the vehicle securely before removing the shocks.
What’s included
One front B8 5160 remote reservoir shock absorber.
Not included: Boot. Check mounting hardware needs before fitting.









