Overview
The Bilstein B8 5160 Series Remote Reservoir Shock Absorber, part number 25-240412, is a rear shock with a remote reservoir, a 46mm ID smooth body and a mono tube design. It is a direct fit for the 2013 to 2018 Ram 3500 with a w/0 in. Lift/Drop setting.
The remote reservoir adds cooling capacity and wheel travel compared with a traditional shock absorber. The mono tube body aims for consistent, fade free performance, and the digressive valve settings are tuned for each application.
Each unit has a unique 360 degree swivel banjo hose fitting, which Bilstein describes as a clean, low profile installation. Bilstein positions the shock for owners who want durability in harsh off-road conditions.
Key features
- Remote reservoir for increased cooling capacity and wheel travel
- Mono tube design for consistent, fade free performance
- Velocity sensitive digressive valve settings tuned per application
- 360 degree swivel banjo hose fitting
- Zinc plated finish
Hose routing and clearance
The banjo fittings and the reservoir hose are the parts most likely to need attention during a rear shock swap. Plan the hose path before the shock goes in, keeping it away from the exhaust, the driveshaft and the tire path. The hose should keep slack through full suspension travel so it is never pulled tight at the top or bottom of the stroke.
Rear shocks on a heavy-duty truck are exposed to road debris, so inspect the hose sheathing and clamps after rough use. Support the axle or the frame securely while the old shocks come off, and keep the new unit clean until the fittings are seated. A tidy routing makes later inspection easier.
- Hose path clear of exhaust and driveshaft
- Slack through full suspension travel
- Clamps and fittings checked after rough use
- Protective sheathing free of abrasion
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-240412 |
| UPC | 651860752174 |
| Shock series | 5160 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
| Collapsed length | 18.33 in |
| Extended length | 30 in |
| Travel length | 11.67 in |
| Finish | Zinc plated |
| Reservoir | Yes |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Boot included | No |
Vehicle fitment
Fits the 2013 to 2018 Ram 3500 with Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
The 2003 to 2013 Ram 3500 range only partly overlaps the 2013 to 2018 fit. Confirm the model year before installing.
Other Ram models are not covered by either range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The swivel banjo hose fittings allow a clean, low profile hose routing. Compare the package contents with your installation before starting. Support the vehicle securely while the rear shocks are removed.
What’s included
One rear B8 5160 remote reservoir shock absorber.
Not included: Boot. Check the box for mounting hardware before starting the work.









