Overview
The Bilstein 5100 Series Shock Absorber, part number 33-066868, is a mono tube shock for Jeep Cherokee XJ and Wagoneer SJ applications. It fits the 1984 to 2001 Jeep Cherokee (XJ) and the 1984 to 1990 Jeep Wagoneer (SJ).
The 5100 Series is built on traditional Bilstein single tube gas pressure construction, designed for fade-free performance and long life. It suits lifted trucks, Jeeps and prerunners.
The unit has an eye lower mount measuring 16mm and a bar pin upper mount, and it includes a boot. No reservoir is listed.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston for reduced harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Superior control with large diameter tires
Checking an older Jeep setup
Older Jeep suspensions often carry years of worn bushings and tired springs, so a new shock can feel different from the one it replaces. Measure the old unit’s collapsed and extended lengths and note its mounting style before choosing a replacement. A matching length keeps the shock working through its normal stroke instead of hitting its limits.
A shock mounted to a worn bar pin or eye will not damp well, however good the unit is. Inspect the pin, bushing and bracket for play, and replace any that have worn. Damping also depends on tire size and load, so a heavier setup may feel firmer than the original.
- Look for oil streaks on the body
- Check bar pin bushings for wear
- Inspect the upper and lower brackets for cracks
- Replace worn bushings before installing the new shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-066868 |
| UPC | 651860649641 |
| Shock series | 5100 Series |
| Collapsed length | 14.88 in |
| Extended length | 23.84 in |
| Travel length | 8.96 in |
| Lower mount | Eye 16mm |
| Upper mount | Bar pin |
| Shaft diameter | 14mm |
| Reservoir | No |
| Finish | Zinc plated |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Boot included | Yes |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee (XJ), in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1984 to 1990 Jeep Wagoneer (SJ), in Base and Limited trims.
Grand Cherokee and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 5100 Series shock absorber with a boot. Check what arrives in the box against your setup before you begin.









