Overview
The Bilstein 25-237429 is a rear 46mm monotube shock absorber with a remote reservoir, from the Bilstein B8 5160 Series. It is designed as a direct fit for each specific vehicle application, which avoids the custom fabrication often needed for a high-performance reservoir shock.
The 46mm digressive piston and self-adjusting deflective disc valving are paired with the reservoir, which Bilstein says adds cooling capacity and increased shock travel.
Key features
- Remote reservoir design
- 46mm digressive piston
- Self-adjusting deflective disc valving
- Rear position
- Direct fit to each specific vehicle application.
- Covers w/0 – 1.5 in. lift
Planning a reservoir install
A remote reservoir shock uses a separate body connected to the shock by a hose. That layout moves the gas charge away from the main body, which gives room for oil and helps the damping stay steady during longer runs over rough ground.
Plan the mounting space before the shock is removed. Check where the reservoir will sit, how the hose will route past the frame, suspension and exhaust, and whether the hose will stay clear of heat sources and moving parts. Use clamps and fasteners that suit the hose and body.
A reservoir shock often works best as part of a matched rear setup. If the lift changes, the required length and hose path may change too, so confirm clearance with the suspension at full travel. Replacing worn bushings and hardware at the same time keeps the new unit working as intended.
- Confirm clearance with the wheels turned
- Check the hose for kinks, rubbing or cracks
- Keep the reservoir clear of mud and debris
- Re-check the clamps after the first trail runs
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-237429 |
| UPC | 651860737751 |
| Shock series | 5160 Series |
| Position | Rear |
| Piston | 46mm digressive |
| Valving | Self-adjusting deflective disc |
| Reservoir | Remote |
| Gas charge | Gas charged |
| Fitment | Direct Fit |
| Lift height | w/0 – 1.5 in. lift |
Vehicle fitment
Direct Fit is the fitment type, but no year, model or trim is tied to it. Because the shock is built for a specific application, compare the vehicle match before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A remote reservoir is a separate body linked to the shock body, so check mounting space and hose routing before the rear shock is installed.
What’s included
This is one rear shock absorber with its remote reservoir. Check the package contents for reservoir mounting hardware before installing.









