Overview
The Bilstein 5100 Series Shock Absorber, part number 33-061399, is a mono tube gas pressure shock for lifted trucks and prerunners. It fits 1988 to 2000 Chevrolet and GMC K1500, K2500 and K3500 pickups, Suburban models, the Blazer, Tahoe and Yukon.
The shock uses a single tube high gas pressure design, built for consistent, fade free damping and long life. Self-adjusting deflecting disc valving and a high-flow piston reduce harshness, with separate rebound and compression tuning and a larger working piston area.
Bilstein designs the 5100 Series for specific manufacturer lift kits that use the stock O.E.M. mounting configuration. Bilstein also notes superior control with large diameter tires.
Key features
- Mono tube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston that reduces harshness
- Independent rebound and compression tuning
- Larger working piston area for exact damping
- Designed to use the stock O.E.M. mounting configuration
Before you buy
A mono tube gas shock keeps its gas and damping oil inside one cylinder, so the piston works in a single chamber. That layout tends to hold steady over repeated trail use, which suits trucks carrying a lift and larger tires. Before buying, compare collapsed and extended lengths with your current unit, because a different body length changes how the suspension sits at full droop and full compression.
Shocks rarely wear alone. Bushings, mounting hardware and bump stops often age at the same time, so inspect them while the old shock is off. Fresh hardware helps keep the eyes aligned and prevents the new unit from binding.
- Look for oil residue along the body
- Check eye bushings for cracks or play
- Replace worn bump stops at the same time
- Re-torque mounting bolts after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-061399 |
| UPC | 651860636795 |
| Shock series | 5100 Series |
| Collapsed length | 14.37 in |
| Extended length | 22.78 in |
| Travel length | 8.41 in |
| Lower mount | Eye 12.9mm |
| Upper mount | Eye 12.9mm |
| Shaft diameter | 14mm |
| Reservoir | No |
| Finish | Zinc plated |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Boot included | Yes |
Vehicle fitment
It fits 1988 to 2000 Chevrolet and GMC K-series trucks, 1992 to 1999 Suburban models, the 1992 to 1994 Chevrolet Blazer, the 1995 to 1999 Chevrolet Tahoe and the 1992 to 1999 GMC Yukon. Trims include Base, Cheyenne, LS, Silverado, Sierra and Scottsdale.
Jeep applications and Chevrolet and GMC years after 2000 fall outside the fit range. Verify your vehicle’s year, model and trim before ordering.
What’s included
A boot is included. Look over the package contents against your installation before starting.









