Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 1549–1560 of 1736 resultsSorted by popularity
-
Lift Kits
Rubicon Express 2 Inch Economy Lift Kit with Rear Add-A-Leafs and Twin Tube Shocks – RE6160
Lift KitsRubicon Express 2 Inch Economy Lift Kit with Rear Add-A-Leafs and Twin Tube Shocks – RE6160
- Rubicon Express RE6160 2 inch economy lift kit for 1984–2001 Jeep Cherokee XJ
- Front 1.75 inch coil spacers on factory coil springs, plus a rear add-a-leaf
- Precision valved twin-tube shocks and a stainless steel rear brake line included
- Fits 1984–2001 Jeep Cherokee XJ; alignment check after installation
SKU: R/ERE6160 -
Lift Kits
Rubicon Express 4.5 Inch Super-Flex Short Arm Lift Kit – No Shocks – RE8000
- 4.5-inch Super-Flex short arm lift for Grand Cherokee ZJ with no shocks
- Adjustable front track bar and rear control arms with Super-Flex ball joints
- Replacement lift springs and Gen II sway bar disconnects
- Keeps the factory short arm design and mounting points
- Covers the 1993-1998 Grand Cherokee (ZJ)
SKU: R/ERE8000 -
-
Lift Kits
Rubicon Express 5.5 Inch Extreme-Duty 4-LINK Long Arm Lift Kit – JK4425
- 5.5-inch extreme-duty 4-link long arm lift kit, without shocks
- Adjustable chromoly upper and lower control arms and Super-Flex ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed for installation without welding
- Shocks not included; fitment years not listed
SKU: R/EJK4425 -
Lift Kits
Rubicon Express 3.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono-Tube Shocks – JK4443M
Lift KitsRubicon Express 3.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono-Tube Shocks – JK4443M
- 3.5-inch extreme-duty 4-link long arm lift with Mono-Tube shocks
- Chromoly upper and lower control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed for installation without welding
- Confirm fit by year, model and trim before ordering.
SKU: R/EJK4443M -
Lift Kits
Rubicon Express 3.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono Tube Shocks – JK4423M
Lift KitsRubicon Express 3.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono Tube Shocks – JK4423M
- 3.5-inch extreme-duty 4-link long arm lift with Mono Tube shocks included
- Adjustable chromoly control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed to install without welding
- No model years listed; confirm fitment before ordering
SKU: R/EJK4423M -
Lift Kits
Rubicon Express 3.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit – JK4443
- 3.5-inch extreme-duty 4-link long arm lift kit
- Adjustable chromoly upper and lower control arms with Super-Flex ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed to install without welding
- Shocks not included; no model years listed
SKU: R/EJK4443 -
Lift Kits
Rubicon Express 4.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono-Tube Shocks – JK4444M
Lift KitsRubicon Express 4.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono-Tube Shocks – JK4444M
- 4.5-inch extreme-duty 4-link long arm lift with Mono-Tube shocks included
- Chromoly upper and lower control arms, adjustable
- Super-Flex spherical ball joints and PT-Meg Super-Ride bushings
- Full-width transmission crossmember; no welding required
- No model years listed; confirm fitment before ordering
SKU: R/EJK4444M -
Lift Kits
Rubicon Express 4.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono Tube Shocks – JK4424M
Lift KitsRubicon Express 4.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit with Mono Tube Shocks – JK4424M
- 4.5-inch extreme-duty 4-link long arm lift kit with Mono Tube shocks included
- Adjustable chromoly control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed for installation without welding, per the manufacturer
- No model years listed; confirm fitment before ordering
SKU: R/EJK4424M -
Lift Kits
Rubicon Express 3.5 Inch Super-Flex Suspension Lift Kit with Shocks – RE7147M
- Rubicon Express RE7147M 3.5 inch Super-Flex suspension lift kit with mono tube shocks
- Fits the Jeep Wrangler JK, 4-door models, from 2007 to 2018
- Adjustable lower control arms, adjustable front track bar, springs and sway bar disconnects
- Lift height range 2.5 to 3.5 inches
SKU: R/ERE7147M -
Lift Kits
Rubicon Express 3.5 Inch Super-Ride Suspension Lift Kit – RE6026
- Rubicon Express RE6026, a 3.5-inch Super-Ride suspension lift kit
- For the 1984–2001 Jeep Cherokee (XJ)
- Replacement Super-Ride lower control arms and leaf springs
- Lift range 2.5 to 3.5 inches; shocks not included
SKU: R/ERE6026 -
Lift Kits
Rubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit with Rear Add-A-Leafs – No Shocks – RE6010
Lift KitsRubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit with Rear Add-A-Leafs – No Shocks – RE6010
- Rubicon Express RE6010 3.5 inch Super-Flex short arm lift kit with rear add-a-leafs, no shocks
- Made for the 1984–2001 Jeep Cherokee (XJ)
- Fixed lower control arms, Super-Flex spherical ball joints and tuned front coil springs
- Lift height range 3 to 4.99 inches
SKU: R/ERE6010
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.




