Overview
The Icon Suspension 22011 is a Stage 1 2.5 inch suspension system for the Jeep Wrangler JL, in two-door and four-door models. It is the Stage 1 of the two ICON JL systems: it lifts the vehicle 2.5 inches and increases wheel travel for on and off road use.
The Stage 1 system fits 35 inch tires, and a bump stop spacer kit allows 37 inch tires. Wheels in 4.5 and 4.75 inch backspace are available for the axle widths of Rubicon and non-Rubicon models.
Key features
- 2.5 inch lift height
- It gives 3 inches more front and 2 inches more rear wheel travel than stock.
- Dual rate coil springs with a lifetime guarantee against sagging and breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- Bolt-on system, with no cutting or welding described
- Tested by ICON in its off-road ICON 1K program, which Icon says logged over a thousand miles of dirt driving
Choosing the right setup
A suspension system like this changes how the whole vehicle sits, so it is worth thinking through the rest of the build before ordering. Raising the body and reshaping wheel travel alters the geometry of the steering, the driveline and the brakes. Owners often replace or adjust the brake lines, steering components and driveshaft at the same time, since longer travel and new angles place more strain on them. Bigger tires are the usual next step, and they add weight and change gearing, so plan for wheels with the right backspace and check fender clearance at full lock before driving the truck.
Once installed, inspect the coil springs, shock mounts and control arm bushings at regular intervals, especially after rough trail runs. Torque the hardware again after the first few drives, as bolts can settle under new loads. Keep the alignment record with the parts paperwork so a shop knows the setup when service is needed. A worn shock is often the first sign that the system needs attention, so look for fluid on the shock body, uneven tire wear or a bouncy ride on pavement.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 22011 |
| UPC | 700008541871 |
| Lift height | 2.5 inches |
| Front wheel travel gain | 3 inches over stock |
| Rear wheel travel gain | 2 inches over stock |
| Tire size | 35 inch; 37 inch with bump stop spacer kit |
| Shocks | 2.0 Aluminum Series, vehicle specific valving |
| Springs | Dual rate coil springs |
The Stage 1 and Stage 2 systems both reach 2.5 inches of lift. The difference between them is the included parts. Confirm the components against your installation plan before ordering.
Vehicle fitment
It fits the Jeep Wrangler JL, 2018-2026 model years, in two-door and four-door models. It is not made for the Wrangler JK or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is bolt-on. Alignment is needed after a lift of this size, and driveline angles should be checked once the new height is set.
What’s included
It includes the 2.5 inch suspension system with shocks and dual rate coil springs. The bump stop spacer kit for 37 inch tires is a separate option.





