Overview
The Rubicon Express RE8000 is a 4.5-inch Super-Flex short arm lift kit for the Jeep Grand Cherokee ZJ, sold without shocks. It keeps the factory suspension mounting points and suits Grand Cherokee models with factory short arm geometry.
The kit replaces the stock suspension with an adjustable front track bar, lower and upper adjustable rear control arms with Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects. The result is a smoother, more flexible ride on and off the trail. Shocks are not included, so a separate set is needed. The lift falls in the 3 to 4.99-inch range.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Short arm design that retains the factory mounting points
- Adjustable front track bar
- Lower and upper adjustable rear control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Gen II sway bar disconnects
- Replacement lift springs
Care for a short arm ZJ
Short arm systems keep the factory mounting points, so the layout stays familiar, but the arms, track bar and springs are new parts that work together. Check that the track bar and arms are fitted to the correct sides before the vehicle is driven. Once the springs settle, a fresh alignment check is a good habit.
Track bars, sway bar disconnects and the front axle components are worth inspecting during service. Look for worn bushings, loose bolts and grease leaks, and listen for knocks when turning. Sway bar disconnects are often used off road, so check their pins and linkage after hard runs. Keeping a simple inspection routine helps the lift perform as intended. Note any changes in steering feel early.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE8000 |
| UPC | 614901442120 |
| System type | Super-Flex short arm lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Front track bar | Adjustable |
| Rear control arms | Lower and upper, adjustable |
| Joints | Super-Flex spherical ball joints |
| Sway bar disconnects | Gen II |
| Shocks | Not included |
Vehicle fitment
This kit fits the 1993-1998 Jeep Grand Cherokee (ZJ).
Confirm your vehicle’s year, model and trim before ordering, and make sure it is a ZJ generation.
Installation notes
The kit uses the factory suspension mounting points, but the arms, track bar and lift springs replace the stock parts. Check the alignment after installation.
What’s included
The kit includes the adjustable front track bar, lower and upper adjustable rear control arms, Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects.
Not included: shock absorbers.



