Overview
The Rubicon Express JK4444M is a 4.5-inch extreme-duty 4-link long arm lift kit with Mono-Tube shocks included. It sits in Rubicon Express’s JK suspension line and uses adjustable chromoly upper and lower control arms with Super-Flex spherical ball joints. PT-Meg Super-Ride bushings complete the arm set, and a full-width transmission crossmember provides the mounting structure for the drivetrain.
This is the shock-equipped version of the 4.5-inch 4-link long arm. The system delivers control and performance while leaving articulation unrestricted, and installation does not need welding. Optional belly pan and CNC-machined steering knuckle upgrades are available. The lift chart range is 3 to 4.99 inches. Verify fit against your year, model and trim first.
Key features
- 4.5-inch lift height, in the 3 to 4.99-inch range
- Extreme-duty 4-link long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Mono-Tube shocks included
- Optional belly pan and steering knuckle
Alignment after a long arm install
A 4-link long arm system fixes the axle location with the control arms, so the pinion angle and driveline geometry have to be set after the lift is in. Changing these angles can cause vibration if the driveshaft runs at a steep angle, so measure before taking the vehicle onto the trail.
Control arm bushings and spherical joints carry the load that the arms take from the axle. Inspect the joint boots and the bushing sleeves after the first few trail runs, and recheck the crossmember bolts. Regular greasing keeps the joints moving freely and extends their service life.
- Measure pinion angle after setup
- Check driveshaft u-joints for binding
- Inspect joint boots for tears
- Recheck crossmember and control arm fasteners
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4444M |
| UPC | 70000651285 |
| System type | Extreme-duty 4-link long arm lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Mono-Tube, included |
Vehicle fitment
It belongs to the JK suspension range. Check the year, model and trim against your Wrangler before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-link arms change pinion angle and driveline geometry, so the alignment and driveline angles need to be checked once the lift is in. Because the shocks come with the kit, the factory shocks do not need to be reused.
What’s included
The kit includes the adjustable chromoly upper and lower control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings, the full-width transmission crossmember and the Mono-Tube shocks.
The kit is the 4.5-inch version of the same extreme-duty 4-link long arm design that the manufacturer also offers at 3.5 and 5.5 inches. Each height uses the chromoly control arms and Super-Flex joints described above, so the lift height is the main difference between the versions.



