Exhaust Systems, Headers, Pipes and Hardware
Showing 13–24 of 211 resultsSorted by popularity
-
Catalytic Converters
MagnaFlow Universal California Catalytic Converter – 3391006
- Universal California catalytic converter, part number M/F3391006
- 2.5 in. tubing and 2.5 in. inlet and outlet
- 11 in. length, 5 in. width, 11 in. overall length
- Fits 1980–1995 Chevrolet, GMC, Dodge, Jeep, Isuzu and other models
SKU: M/F3391006 -
Catalytic Converters
MagnaFlow Universal California Catalytic Converter – 3391005
- Universal California catalytic converter, part number M/F3391005
- 2.25 in. inlet and outlet, 11 in. length, 5 in. width
- Not air tube kit adaptable
- Fits 1975–1995 Chevrolet, Ford, GMC, Jeep and other models
SKU: M/F3391005 -
-
-
Turbo Down Pipe
MagnaFlow Turbo Outlet Down Pipe – 15398
- Fits 2001–2004 Chevrolet Silverado 2500 HD and 3500 and 2004 GMC Sierra 2500 HD and 2001–2004 GMC Sierra 3500 per the manufacturer list
- MagnaFlow turbo outlet down pipe, part number M/F15398
- Mandrel-bent, high flow unit that replaces the factory down pipe
- Listed in a single configuration
SKU: M/F15398 -
Exhaust System Kit
MagnaFlow Street Series Cat-Back Performance Exhaust System with Black Tips – 19543
Exhaust System KitMagnaFlow Street Series Cat-Back Performance Exhaust System with Black Tips – 19543
- Fits 2021 Chevrolet Suburban (High Country, LS, LT, Premier, RST, Z71), GMC Yukon XL (AT4, Denali, SLE, SLT) and Cadillac Escalade ESV trims listed by MagnaFlow
- 3-inch stainless steel piping with quad split rear exit
- Straight-through muffler and quarter-wave resonators for No Drone Technology noise control
- Black chrome-finished 4-inch tips included
- Part number M/F19543, with a limited lifetime warranty stated by MagnaFlow
SKU: M/F19543 -
Exhaust System Kit
MagnaFlow Street Series Cat-Back Performance Exhaust System – 19498
- Fits the 2019 Ram 1500 and 2019 Ram 1500 Classic per the manufacturer fitment list
- Stainless steel cat-back system, dual split rear exit, 2.5-inch tubing
- Tip included
- Part number M/F19498 from MagnaFlow Exhaust
SKU: M/F19498 -
-
Exhaust System Kit
MagnaFlow Street Series Cat-Back Exhaust System (Black Tips) – 19454
- Fits the 2019 Ford Ranger (Lariat, XL, XLT) per the manufacturer fitment list
- Stainless steel cat-back exhaust with dual side exit
- 3-inch tubing
- Black tips; tip included with the kit
- Part number M/F19454
SKU: M/F19454 -
Exhaust Tips
MagnaFlow Stainless Steel Exhaust Tip (Polished) – 35215
- MagnaFlow M/F35215 polished stainless steel exhaust tip with a 6 Inches diameter
- Universal Fit: no particular vehicle is named
- Round 100% 304 stainless steel, single or double wall
- Clamp-on or weld-on installation options
SKU: M/F35215 -
Exhaust Tips
MagnaFlow Stainless Steel Exhaust Tip (Polished) – 35143
- MagnaFlow M/F35143 polished stainless steel exhaust tip with a 3.5 Inches diameter
- Universal Fit: no specific year, make or model is named
- 100% 304 stainless steel, round, single or double wall
- Clamp-on or weld-on installation
SKU: M/F35143
Exhaust system types
The exhaust carries gases from the cylinder head to the tailpipe, and each segment is sold separately or as a kit. Knowing which segment you are replacing keeps the search short.
- Headers replace the restrictive factory manifold with individual tubes per cylinder.
- Cat-back systems replace everything from the catalytic converter rearward: pipe, muffler and tips.
- Axle-back systems replace only the muffler section and change sound the most for the least work.
- Mufflers, resonators and tips can be swapped individually to tune tone or appearance.
Material and construction
Aluminized steel is the economical choice and resists rust in dry climates. Stainless steel, often 304 grade, resists corrosion better and lasts longer where roads are salted. Mandrel-bent tubing keeps a consistent diameter through bends, which helps flow compared with crush-bent pipe. Check the material field on the product listing, as the sample listings do.
Sound and performance expectations
Exhaust upgrades change tone more reliably than power. Any gains are generally modest on an otherwise stock engine and are strongest when paired with other intake or tuning changes. Muffler design affects loudness and drone at highway speed, so read descriptions for the intended sound level. Single-side or dual-rear exits also change fit and appearance.
Emissions and legal points
Catalytic converters are emissions equipment. Federal rules prohibit removing or defeating them, and some states, including those that follow California standards, require specific approved parts or an executive order number. Noise limits also vary by state and city. Check the product details and your local regulations before choosing.
Installation notes
- Confirm engine, cab and bed configuration, wheelbase and model year, since routing differs.
- Replace gaskets, clamps and hangers when you replace pipe.
- Allow clearance from the fuel tank, brake lines and body panels, and let the system cool before handling.
- Penetrating oil on old fasteners saves time, and a professional exhaust shop can handle welding or cutting.
Use clamps only where intended and tighten to the instructions' specification. After installing, check for leaks at each joint with the engine running.
Pairing parts and avoiding mistakes
Pipe diameter should suit the engine's output. Too small a pipe restricts flow, while a much larger one can reduce exhaust velocity and low-end response. Most trucks work well with the diameter the manufacturer of a cat-back system specifies for that engine, so stick to vehicle-specific kits unless you are building a custom system.
- Hangers and isolators should keep the system a few inches from the frame and body. Rubber hangers that sag can let pipes rattle.
- Clamps come as band, U-bolt and V-band styles. Band clamps seal better on slip joints than U-bolt types, which can crush the pipe.
- Spacers and adapters help when joining pipes of different diameters or aligning flanges, but check that the gasket surface is flat.
- Oxygen sensors must be reinstalled in their original bungs, and wiring should be kept away from the hot pipe.
Inspect the system for cracks, loose hangers and blown gaskets once a year. A ticking noise on cold start often points to a leak at the manifold or a flange gasket.
Popular Exhaust Systems, Headers, Pipes and Hardware brands
- MagnaFlow Exhaust (62)
- Flowmaster Exhaust (44)
- Borla (43)
- Dynomax Exhaust (16)
- Go Rhino (9)
- Corsa Performance Exhaust (8)
- Hedman (7)
- Afe Power (3)
- MBRP (3)
- Banks Power (3)
- JBA Headers (3)
- Mr. Gasket Company (2)
Shop Exhaust Systems, Headers, Pipes and Hardware by type
- Exhaust System Kit (107)
- Muffler (29)
- Exhaust Tips (27)
- Catalytic Converters (8)
- Exhaust Clamps (4)
- Exhaust Spacers (3)
- Exhaust Hanger (3)
- Exhaust Header Gaskets (2)
- Exhaust Pipes (3)
- Exhaust Headers (3)
- Exhaust Header Bolt (2)
- Exhaust Header Installation Kit (2)
- Exhaust Pipe Extension (2)
- Exhaust Pipe Adapter (2)
- Exhaust Bracket (2)
- Exhaust Manifold Gasket (2)
- Exhaust Resonators (2)
- Exhaust Flange Gasket (1)
- Exhaust Cut-Out (1)
- Exhaust Pipe Connector (1)
- Exhaust Manifold Gasket Set (1)
- Exhaust Intermediate Pipes (1)
- Exhaust Header Reducer (1)
- Exhaust Tail Pipes (1)
Exhaust Systems, Headers, Pipes and Hardware FAQ
What is the difference between cat-back and axle-back?
A cat-back system replaces the pipes, muffler and tips behind the catalytic converter. An axle-back replaces only the section behind the rear axle, usually the muffler and tips. Cat-backs affect flow and sound more, while axle-backs are simpler.
Will a new exhaust add horsepower?
Some systems give small gains, especially on engines where the factory exhaust is restrictive, but results vary. Expect the tone to change more than the power. Dyno claims should be treated carefully unless they match your vehicle.
Is stainless steel exhaust worth it?
Stainless resists rust and corrosion better than aluminized steel, so it tends to last longer, especially in areas that salt roads. Aluminized steel works well in dry climates and often costs less.
Are aftermarket exhausts legal?
It depends. Mufflers and pipes may face noise limits, and catalytic converters must meet emissions rules, with stricter requirements in some states. Check state and local regulations and the manufacturer's compliance information before choosing.










