Overview
The MagnaFlow 11133 is a satin stainless steel straight-through muffler with 1.75 inch inlet and outlet tubes, both offset. It is built from 100% stainless steel and uses a perforated core for a smooth, deep tone.
MagnaFlow marks the 11133 as universal fit and names no vehicles, so the tube size and offset positions are the main checks before it is matched to a pipe.
Key features
- 100% stainless steel body, lap-joint welded
- Free-flowing straight-through perforated stainless core
- Stainless mesh wrap around acoustical fiber fill
- Acoustical packing that MagnaFlow says keeps sound consistent over time
- Lifetime Warranty backing from MagnaFlow
Choosing a universal muffler
Sound on a straight-through muffler comes from the perforated core and the fill around it. Denser packing usually gives a quieter, lower tone, while lighter packing raises volume. Pick a design that matches how loud you want the vehicle at idle and on the highway, and remember that tone also shifts with pipe length and engine speed.
Stainless steel holds up to road salt and moisture far better than aluminized steel, so it suits vehicles driven through winter. Because the offset tubes limit how the muffler sits in the run, plan the routing before cutting. Dry-fit the assembly, check clearance from the axle and fuel lines, and only then clamp or weld.
- Replace clamps and hangers when the old muffler comes off
- Check the pipe for thin spots before reusing it
- Keep the tailpipe clear of rubber bushings and bumpers
- Inspect the welds for cracks after the first few drives
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | M/F11133 |
| Muffler type | Straight through |
| Material | 100% stainless steel |
| Finish | Satin stainless |
| Tube size | 1.75 inches inlet and outlet |
| Inlet location | Offset |
| Outlet location | Offset |
| Fitment type | Universal fit |
| Warranty | Lifetime |
Vehicle fitment
No vehicles are named for this muffler. MagnaFlow marks it universal fit, which means it is not matched to a specific year, make or model. Measure the existing pipe diameter and confirm the offset inlet and outlet line up with your system before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting a universal muffler usually means cutting the existing pipe and joining it with clamps or welds, so the offset positions must match your routing. Wear eye protection while cutting, and keep the tailpipe clear of the body and frame.
What’s included
The package covers the muffler only. Clamps, hangers and connecting pipe must be bought separately.
Not included: connecting exhaust pipe, clamps and hangers.









