Overview
The MagnaFlow 11214 is a satin stainless steel straight-through muffler with 2 inch inlet and outlet tubes, both centered. It is one of MagnaFlow’s Performance mufflers built from 100% stainless steel, with a perforated core for a smooth, deep sound.
No vehicle is named for this muffler. It is marked universal fit, so match the 2 inch piping and the centered inlet and outlet to your own exhaust before installing.
Key features
- 100% stainless steel body
- Lap-joint welded construction
- Perforated straight-through core with stainless mesh wrap
- Acoustical fiber fill for a deep tone and long life
- Lifetime Warranty stated by MagnaFlow
Matching a 2 inch system
Two inch exhaust is a common size for smaller engines and lighter vehicles, and it flows well when the whole run keeps the same diameter. Changing to a larger or smaller pipe partway through can add restriction or turbulence. Measure the outside diameter of the pipe at the joint before buying, and use a reducer only if the layout truly needs one.
A centered inlet and outlet let the muffler fit in a straight run, which simplifies routing under the floor. Check that the body clears the frame, the spare tire area and the rear suspension at full travel. Keep the old clamps and hangers out of the way until the new layout is confirmed.
- Measure pipe diameter at the joint, not only at the flange
- Use exhaust clamps sized for the pipe
- Support the muffler with hangers so it does not sag
- Check for leaks at the joints with the engine running
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | M/F11214 |
| Muffler type | Straight through |
| Material | Stainless steel |
| Finish | Satin |
| Tube size | 2 inches inlet and outlet |
| Inlet location | Centered |
| Outlet location | Centered |
| Fitment type | Universal fit |
| Warranty | Lifetime |
Vehicle fitment
The 11214 carries a universal fit marking and no vehicle list. Fit depends on whether the 2 inch tubing and centered inlet and outlet suit your exhaust layout, so measure before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Universal mufflers are usually cut into an existing pipe run and secured with clamps or welds. Plan the routing around the centered inlet and outlet, and wear eye protection when cutting.
What’s included
The package covers the muffler body only. Connecting pipe, clamps and hangers are not included.
Not included: connecting pipe, clamps and hangers.









