Select your vehicle

MagnaFlow Stainless Steel Cat-Back Performance Exhaust System – 15361

MagnaFlow Exhaust

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500 per the manufacturer fitment list
  • Stainless steel cat-back exhaust with a dual split rear exit
  • 3-inch and 2.5-inch tubing
  • Tip included
  • Part number M/F15361 from MagnaFlow Exhaust

Description

Overview

The MagnaFlow M/F15361 is a stainless steel cat-back performance exhaust system for the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. A cat-back system replaces the piping from the catalytic converter back to the tailpipe, so the sound and flow change without touching the factory headers.

MagnaFlow’s stated goal with this line is a deeper sound under throttle and quiet, drone-free cruising. The company says its patented muffler design and mandrel bent tubing support that goal, and that the tubing flows more smoothly than stock piping. The specifications below list the measurable details.

Key features

  • Dual split rear exit
  • Stainless steel construction
  • Mandrel bent tubing, which MagnaFlow says improves flow over stock piping
  • Patented MagnaFlow muffler design
  • 3-inch and 2.5-inch tubing sizes
  • Tip included

Before you buy

A dual split rear exit uses two outlets, which changes how the tips sit at the bumper. Measure the clearance behind the bumper on your truck before installing, especially if you use a hitch or receiver.

Mixed tubing sizes such as 3-inch and 2.5-inch sections are common in dual exhausts, so the joins deserve careful alignment during installation. Use new clamps where the sections meet and keep the pipe free of kinks. Stainless construction handles road salt well, but the joints still need periodic inspection.

Pairing a muffler swap with a cold air intake can shift how the engine sounds at idle. Some owners also replace the rear hangers at the same time to keep the new tubing from sagging.

  • Confirm bumper clearance before cutting or drilling
  • Replace worn hangers while the pipe is off
  • Re-check joint alignment after the first heat cycle

Specifications

Brand MagnaFlow Exhaust
Part number M/F15361
System type Cat-back
Exit location and type Dual split rear
Material Stainless steel
Tubing size 3 inches and 2.5 inches
Tip included Yes
Fitment type Direct fit

Vehicle fitment

MagnaFlow’s manufacturer fitment list covers the 2014–2018 Chevrolet Silverado 1500 in Custom, High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2018 GMC Sierra 1500 in Base, Denali, SLE and SLT trims.

The list does not cover the 2019 and newer Silverado 1500 or Sierra 1500, the heavy-duty Silverado 2500HD and Sierra 2500HD, or other GM trucks. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A tip is included, as the specifications state.

Not included: Check the box for hangers, clamps and gaskets before starting work.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014–2018Custom, High Country, LS, LT, LTZ, SSV, WT
GMC Sierra 15002014–2018Base, Denali, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the MagnaFlow M/F15361 fit my truck?

Its manufacturer fitment list names the 2014–2018 Chevrolet Silverado 1500 in Custom, High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2018 GMC Sierra 1500 in Base, Denali, SLE and SLT trims. Confirm your year, model and trim before ordering.

Is the MagnaFlow M/F15361 made from stainless steel?

Yes. The system is stainless steel, a cat-back design with a dual split rear exit and 3-inch and 2.5-inch tubing.

Does the kit include a tip and mounting hardware?

Yes. A tip is included, and the exit is a dual split rear design. Check the box for hangers, clamps and gaskets before starting work.

Can a dual split exhaust be installed without a lift?

Usually yes, if the truck is raised safely on jack stands and the work area is level. The rear is tight near the axle, so plan extra time for the joints and hangers. A helper makes aligning the sections easier and reduces the chance of bent pipe.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon