Tail & Brake Lights
Showing 25–36 of 129 resultsSorted by popularity
-
Tail & Brake Lights
Putco 60″ Direct-Fit Blade LED Tailgate Light Bar (Amber) – 9201960-04
- Putco 60-inch Direct-Fit Blade LED tailgate light bar in amber
- Fits Chevrolet, GMC, Ford, Nissan, Ram and Toyota pickups
- Runs on the factory 4 pin harness
- Turn signals, reverse, running, brake and hazard over-ride functions
- Dense LED layout for one seamless blade of light
SKU: PUT9201960-04 -
Tail & Brake Lights
Putco 18″ Direct-Fit Blade LED Tailgate Light Bar (Amber) – 9200918-04
- Putco 18-inch Direct-Fit Blade LED tailgate light bar in amber
- Fits Jeep Wrangler JK and JL, and Ram 1500, 2500 and 3500
- Runs on the factory 4-pin harness
- Turn signals, reverse, running, brake and hazard over-ride functions
- Tinted polycarbonate housing, fully encapsulated
SKU: PUT9200918-04 -
Tail & Brake Lights
Oracle Lighting Flush Mount LED Tail Lights – 5882-504
- Oracle Lighting ORC5882-504 flush mount LED tail lights, direct fit for 2020–2026 Jeep Gladiator (JT)
- Wrap-around design protrudes less than the factory tail lights
- Reverse light with 10 high-powered LEDs plus signature perimeter lighting
- Plug-and-play design, compatible with base and LED packages
- Accommodates the optional cross-traffic sensor, which can be swapped over from the factory assembly
SKU: ORC5882-504 -
Tail & Brake Lights
Oracle Lighting Black Series LED Tail Lights – 5852-504
- Oracle Lighting Black Series LED tail lights for the 2018–2026 Jeep Wrangler JL
- Blacked-out housing with hour-glass LED design
- Driving, brake, reverse and turn signal LEDs
- Plug-and-play connection to the factory JL tail light socket
- Pre-wired load equalizers and IP67 waterproof rating
SKU: ORC5852-504 -
Tail & Brake Lights
Morimoto XB LED Tail Lights (Red) – LF430
- Morimoto XB LED tail lights, part number MRILF430, sold as a pair
- Red lens, Tail Light Series XB
- Fits 2015–2020 Ford F-150 trims named below, with 2018 and later trucks requiring the optional harness
- Plug-and-play connectors for the factory tail light plugs on 2015 to 2017 trucks
SKU: MRILF430 -
-
-
Tail & Brake Lights
In Pro Carwear LED Tail Lamps – LEDT-3041CB
- In Pro Carwear LED tail lamps, part number INPLEDT-3041CB
- Fits 2007–2013 GMC Sierra 1500 (Hybrid, SL, SLE, SLT, WT, XFE) and 2007–2013 GMC Sierra 2500 HD (SLE, SLT, WT)
- Fiber optic and LED lighting
- Bermuda Black color
SKU: INPLEDT-3041CB -
-
Tail & Brake Lights
Anzo Tail Lights – 311059
- Anzo LED tail light assemblies with clear lens and black housing, sold as a pair
- Part number 311059, direct fit across many 1988–2000 Chevrolet and GMC models
- Fitment list covers C/K pickups, Suburbans, Blazers, Tahoes, Yukons and Escalade
- Trims are listed per model in the fitment details
SKU: ANZ311059 -
Tail & Brake Lights
Anzo LED Tail Lights (Black) – 311257
- Anzo LED tail lights, black housing with clear lens, sold as a pair
- Part number 311257, direct fit for 2009–2013 Ford F-150 trims.
- Covers FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat and other named trims
- Built to SAE and D.O.T. standards under FMVSS No. 108
SKU: ANZ311257
Replacement or upgrade
People shop for tail lights for two main reasons. One is repair: cracked lenses, moisture inside the housing, or burned-out circuits after years of vibration and trail abuse. The other is appearance and visibility, usually a switch to LED lamps with clear, smoked, or red lenses. Both paths need a light that meets the vehicle's lighting requirements, because brake lights, turn signals, and reverse lamps are safety equipment.
Types of tail light assemblies
- OEM-style replacement: halogen assemblies that match the factory look and plug into the original connector. These are often sold per side.
- LED replacement: sets with many LEDs for faster response and long life. Some include sequential or tinted lenses.
- Housings and lenses: a housing may come with or without a license lamp and wiring pigtail.
- Harnesses and adapters: wiring that connects aftermarket lights or relocates them, such as for bumper swaps.
What to check before choosing
Match the model year range first, since small design changes between years can alter the connector and shape. Note whether the listing is for the driver side, passenger side, or a pair. Look for details like clear lens with black bezel, smoked lens, or black housing, and whether the lamp includes the license plate light. For LED conversions on a vehicle with a computer-monitored lighting circuit, check whether the product notes mention anti-flicker or hyper-flash handling. Some vehicles flash rapidly when a low-draw LED replaces a bulb, and a load resistor or flasher may be needed.
Installation notes
Most assemblies bolt in from inside the cargo area or the bumper and take only basic tools. Disconnect the battery before working on wiring, and inspect the connector for corrosion. Apply a thin layer of dielectric grease to the plug. After installation, test the running lights, brake lights, turn signals, and reverse lights with a helper. Make sure every lamp works before driving.
Lighting equipment standards vary, and lens color and brightness are regulated. Check your state's rules, and look for DOT or SAE markings on the lens where required. Always confirm fitment for your exact year, make, and model with the manufacturer's specifications.
Inspecting and avoiding mistakes
Before ordering, compare the connector shape and pin count of your old lamp with the replacement, since two lamps from different years can look the same and still plug in differently. Check that the housing seals around the lens, because moisture is the most common reason for early failure. Confirm that the replacement has all the functions your vehicle needs, such as a separate reverse lamp, a side marker, or a license plate light. Wiring harnesses should be checked for brittle insulation and melted terminals, which often explain repeated bulb failures. After installing, check alignment of the lens against the body panel for a tight, even gap, and inspect it after a car wash for fogging.
Keep a spare bulb set, a few fuses, and a small tube of dielectric grease in the vehicle. Tail lamp failures are easy to fix on the roadside when you carry these, and a working brake light protects the traffic behind you.
Popular Tail & Brake Lights brands
- Spyder Auto Group (38)
- Crown Automotive (18)
- Omix-Ada (17)
- Recon (13)
- Poison Spyder Customs (9)
- JW Speaker (8)
- Putco (6)
- Rugged Ridge (6)
- Anzo (4)
- In Pro Carwear (4)
- Rigid Industries (3)
- Warrior (2)
Tail & Brake Lights FAQ
Are tail lights sold in pairs?
It varies. Some listings are for a single driver or passenger side, and others include both. Read the title and description closely to see how many pieces you get before choosing.
Why do my turn signals flash fast after installing LED tail lights?
LEDs draw less current than the bulbs they replace, so the vehicle may read a burned-out bulb and speed up the flash. A load resistor or an electronic flasher can fix it, unless the lights are built to avoid the issue.
Do aftermarket tail lights need to be street legal?
Tail lights have federal and state standards for color and visibility. Look for DOT or SAE markings and check local regulations, because smoked lenses and some LED styles can be restricted in certain areas.
Can I replace just the tail light lens?
Sometimes, but many modern assemblies are sealed, and the lens is not sold separately. Cracks can let moisture in and cause failures. Replacing the full assembly is often simpler and keeps the seal intact.











