Overview
The Rugged Ridge 12403.81 is a driver side LED tail light assembly for vintage Jeep CJ3, CJ5 and CJ6 models and Willys CJ-2, CJ-3, CJ-5 and CJ-6 models, covering years from 1946 to 1975.
Its lenses are impact resistant acrylic over a polycarbonate housing. The assembly is DOT and SAE approved and uses a direct bolt on design. The design earned a 2008 SEMA Global Media Award.
Key features
- Left side unit for the driver side
- Acrylic lenses that resist impact
- Polycarbonate housing body
- DOT and SAE approved
- Direct bolt on fitting
Restoration and road use
Early CJ and Willys wiring is often original or partly replaced, so check the ground path before connecting a new lamp. A clean ground at the body and a solid connection to the harness prevent dim or flickering lamps. Older brass terminals corrode quickly, so clean them and apply a light dielectric coating. Confirm the polarity of the harness on your model before you assume it matches a newer design.
Rugged Ridge lens materials help the lamp resist stone chips and everyday impacts, but a cracked housing still lets water in. Inspect the body gasket every season, especially around the bolt holes where rust often starts. On a vintage body, tighten mounting bolts after the first few drives and recheck them after rough trails. Carry a spare fuse for the lighting circuit, since a shorted wire can blow it on a cold start.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 12403.81 |
| UPC | 804314173470 |
| Position | Driver side (Left) |
| Light type | LED |
| Lens material | Impact resistant acrylic |
| Housing material | Polycarbonate |
| Certification | DOT and SAE approved |
Vehicle fitment
The manufacturer fitment list covers Jeep CJ3 (1959–1960 and 1966), CJ5 and CJ6 (1959–1960 and 1966–1975), and Willys CJ-2 (1946–1949), CJ-3 (1949–1958), CJ-5 (1955–1958) and CJ-6 (1956–1958).
Jeep CJ7 models and Wrangler generations are outside the covered range. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The package is one driver side tail light assembly. Check the package contents against your installation before starting.












