Overview
The Spyder Auto Group 5029560 is a pair of red and smoke LED tail lights for the 2010–2011 Chevrolet Silverado 1500, 2500 HD and 3500 HD pickups. Spyder describes them as bolt-in replacements for the factory OE tail lights, and the lights use stock bulbs.
A reverse socket for the 921 bulb is built into the set. It covers Hybrid, LS, LT, LTZ, WT and XFE trims on the 1500, and LT, LTZ and WT trims on the 2500 HD and 3500 HD.
Key features
- Red and smoke lens
- Reverse socket for the 921 bulb
- Uses stock bulbs
- Bolt-in replacement for factory OE tail lights
- Sold as a pair
Reverse lights and bulb types
Reverse lights on these trucks are used for backing lamps and sometimes trailer or work-light circuits, so check that the wiring behind the socket matches the original harness. A 921 bulb is a small wedge-style bulb, and the socket must hold it firmly to avoid flicker over rough roads. Replace bulbs in pairs when one fails, since the other usually has similar hours on it and is near its end. Keep spare bulbs of the same type in the glovebox.
Smoke and red lenses reduce the visible brightness of the lamp, so check that brake and turn signals still look clearly different after installation. Clean the lens inside and out during each oil change, because road film dims the output more than most drivers expect. These are stock-bulb lights, so any future LED bulb swap is a separate decision with its own wiring checks.
Specifications
| Brand | Spyder Auto Group |
|---|---|
| Part number | 5029560 |
| UPC | 847245029560 |
| Lens color | Red and smoke |
| Light type | LED tail light |
| Quantity | Pair |
| Reverse socket | 921 bulb |
| Bulbs | Stock bulbs |
Vehicle fitment
It fits the 2010–2011 Chevrolet Silverado 1500 (Hybrid, LS, LT, LTZ, WT and XFE), the 2010–2011 Silverado 2500 HD (LT, LTZ and WT) and the 2010–2011 Silverado 3500 HD (LT, LTZ and WT).
No GMC Sierra models are listed, and Silverado model years other than 2010 and 2011 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The reverse socket is labeled for a 921 bulb, so match that bulb type when replacing reverse bulbs.
What’s included
One pair of red and smoke LED tail lights with a reverse socket for the 921 bulb.
Not included: Check the package contents for a 921 bulb before installing.









