Tail & Brake Lights
Showing 49–60 of 129 resultsSorted by popularity
-
-
-
-
-
-
Tail & Brake Lights
Spyder Auto Group LED Tail Lights – 5001566
- Smoke-lens LED tail lights from Spyder Auto Group, part number 5001566
- Bolts directly in place of factory OE tail lights, per the brand
- Manufacturer fitment list covers 2000–2006 Chevrolet Suburban, Tahoe, GMC Yukon and Yukon XL
- Uses stock bulbs
SKU: S/L5001566 -
Tail & Brake Lights
Spyder Auto Group LED Tail Lights – 5001535
- Spyder Auto Group 5001535 LED tail lights, chrome, sold as a pair
- Fits 2000–2006 Chevrolet Suburban 1500 and 2500, Tahoe, GMC Yukon and Yukon XL 1500 in covered trims
- Direct bolt-in replacement for factory OE tail lights
- Runs on the stock bulb type
SKU: S/L5001535 -
Tail & Brake Lights
Spyder Auto Group Altezza Tail Lights – 5001504
- Spyder Auto Group 5001504 Altezza tail lights, sold as a pair
- Fits 2000–2006 Chevrolet Suburban, Tahoe and GMC Yukon models in covered trims
- Chrome finish, bolts in place of factory tail lights
- Designed for stock bulbs
SKU: S/L5001504 -
Tail & Brake Lights
Spyder Auto Group Altezza Tail Lights – 5001474
- Altezza style black tail lights, supplied as a pair
- Fits 2000–2006 Chevrolet Suburban 1500, Tahoe, GMC Yukon and Yukon XL 1500 per the manufacturer fitment list
- Bolts directly in place of factory tail lights
- Uses stock bulbs
- Part number 5001474, UPC 847245001474
SKU: S/L5001474 -
Tail & Brake Lights
Rugged Ridge LED Tail Light Assembly – 12403.88
- Pair of LED tail lights with a smoke tinted lens
- No drilling required, plug and play installation
- DOT compliant, for 2 and 4-door models
- Part number 12403.88, UPC 804314258917
- Confirm vehicle fit by year, model and chassis code before ordering
SKU: RUG12403.88 -
Replacement or upgrade
People shop for tail lights for two main reasons. One is repair: cracked lenses, moisture inside the housing, or burned-out circuits after years of vibration and trail abuse. The other is appearance and visibility, usually a switch to LED lamps with clear, smoked, or red lenses. Both paths need a light that meets the vehicle's lighting requirements, because brake lights, turn signals, and reverse lamps are safety equipment.
Types of tail light assemblies
- OEM-style replacement: halogen assemblies that match the factory look and plug into the original connector. These are often sold per side.
- LED replacement: sets with many LEDs for faster response and long life. Some include sequential or tinted lenses.
- Housings and lenses: a housing may come with or without a license lamp and wiring pigtail.
- Harnesses and adapters: wiring that connects aftermarket lights or relocates them, such as for bumper swaps.
What to check before choosing
Match the model year range first, since small design changes between years can alter the connector and shape. Note whether the listing is for the driver side, passenger side, or a pair. Look for details like clear lens with black bezel, smoked lens, or black housing, and whether the lamp includes the license plate light. For LED conversions on a vehicle with a computer-monitored lighting circuit, check whether the product notes mention anti-flicker or hyper-flash handling. Some vehicles flash rapidly when a low-draw LED replaces a bulb, and a load resistor or flasher may be needed.
Installation notes
Most assemblies bolt in from inside the cargo area or the bumper and take only basic tools. Disconnect the battery before working on wiring, and inspect the connector for corrosion. Apply a thin layer of dielectric grease to the plug. After installation, test the running lights, brake lights, turn signals, and reverse lights with a helper. Make sure every lamp works before driving.
Lighting equipment standards vary, and lens color and brightness are regulated. Check your state's rules, and look for DOT or SAE markings on the lens where required. Always confirm fitment for your exact year, make, and model with the manufacturer's specifications.
Inspecting and avoiding mistakes
Before ordering, compare the connector shape and pin count of your old lamp with the replacement, since two lamps from different years can look the same and still plug in differently. Check that the housing seals around the lens, because moisture is the most common reason for early failure. Confirm that the replacement has all the functions your vehicle needs, such as a separate reverse lamp, a side marker, or a license plate light. Wiring harnesses should be checked for brittle insulation and melted terminals, which often explain repeated bulb failures. After installing, check alignment of the lens against the body panel for a tight, even gap, and inspect it after a car wash for fogging.
Keep a spare bulb set, a few fuses, and a small tube of dielectric grease in the vehicle. Tail lamp failures are easy to fix on the roadside when you carry these, and a working brake light protects the traffic behind you.
Popular Tail & Brake Lights brands
- Spyder Auto Group (38)
- Crown Automotive (18)
- Omix-Ada (17)
- Recon (13)
- Poison Spyder Customs (9)
- JW Speaker (8)
- Putco (6)
- Rugged Ridge (6)
- Anzo (4)
- In Pro Carwear (4)
- Rigid Industries (3)
- Warrior (2)
Tail & Brake Lights FAQ
Are tail lights sold in pairs?
It varies. Some listings are for a single driver or passenger side, and others include both. Read the title and description closely to see how many pieces you get before choosing.
Why do my turn signals flash fast after installing LED tail lights?
LEDs draw less current than the bulbs they replace, so the vehicle may read a burned-out bulb and speed up the flash. A load resistor or an electronic flasher can fix it, unless the lights are built to avoid the issue.
Do aftermarket tail lights need to be street legal?
Tail lights have federal and state standards for color and visibility. Look for DOT or SAE markings and check local regulations, because smoked lenses and some LED styles can be restricted in certain areas.
Can I replace just the tail light lens?
Sometimes, but many modern assemblies are sealed, and the lens is not sold separately. Cracks can let moisture in and cause failures. Replacing the full assembly is often simpler and keeps the seal intact.











