Lighting & Lighting Accessories
Showing 253–264 of 2467 resultsSorted by popularity
-
Grille LED Light Kits
Oracle Lighting Universal Illuminated LED “A” Letter Badge (Matte Black) – 3141-A-001
Grille LED Light KitsOracle Lighting Universal Illuminated LED “A” Letter Badge (Matte Black) – 3141-A-001
- Universal illuminated LED “A” letter badge in matte black
- Edge-lit glow, less than 0.1 amp per letter
- Approximately 3.75 inches wide, 1.4 inches tall, 0.5 inch thick
- VHB double-stick adhesive mounting
SKU: ORC3141-A-001 -
Offroad Auxiliary Lights
Oracle Lighting Underbody Wheel Well Rock Light Kit (White) – 5875-001
- Oracle Lighting underbody wheel well rock light kit, white, 5875-001
- Over 2,400 lumens, Cree XQ-E LED chips
- Four lights in a kit, sturdy housings
- Mounts under the body, so confirm fit before ordering
SKU: ORC5875-001 -
-
Replacement Headlights, Tail Lights & Bulbs
Oracle Lighting Switchback LED Halo Headlights – 5769-123
Replacement Headlights, Tail Lights & BulbsOracle Lighting Switchback LED Halo Headlights – 5769-123
- Oracle Lighting ORC5769-123 switchback LED halo headlights with amber turn signal
- Manufacturer fitment list: 2007–2018 Jeep Wrangler (JK) and 2018, 2020–2021 Wrangler (JL)
- Includes H4 and H13 Plug and Play connectors
- 2-Year Replacement Warranty, per the manufacturer
SKU: ORC5769-123 -
-
-
Daytime Running Light
Oracle Lighting RGBW Headlight DRL Upgrade Kit – 1281-339
- Fits 2019–2021 Ram 1500, 2019 Ram 1500 Classic, and 2019–2020 Ram 2500 and 3500 trucks
- Replacement ColorSHIFT RGB+W DRL boards: 8 PCBs for factory LED DRL headlights
- Includes 2 constant current LED driver hubs and 2 heavy-duty IP67 wiring adapters
- Controller not included
SKU: ORC1281-339 -
Headlight & Tail Light Bezel Sets
Oracle Lighting RGB+A Switchback ColorSHIFT – 1328-330
- Oracle Lighting RGB+A Switchback ColorSHIFT halo kit, part ORC1328-330, for 2009–2010 and 2011–2018 Dodge Ram 1500, 2500 and 3500 trucks
- RGB ColorSHIFT halo lighting with added amber LEDs
- Amber LEDs can serve as a turn signal by tapping into the vehicle’s wiring, or as an on-road driving light
- Direct fit per the manufacturer; covered by a lifetime manufacturer warranty
SKU: ORC1328-330 -
-
LED Replacement Bulbs
Oracle Lighting PSX24W/2504 LED Headlight Bulbs – 5245-001
- Oracle Lighting PSX24W/2504 LED headlight bulbs, part ORC5245-001
- Universal fit, not tied to one vehicle
- 4,000+ Lm output per bulb
- Philips Luxeon ZES chips and Samsung-designed drivers
- Adjustable heat sink, removable for reverse install
SKU: ORC5245-001 -
Grille LED Light Kits
Oracle Lighting Pre-Runner Style LED Grille Light Kit (White) – 5870-001
- White Pre-Runner style grille light kit with three 3W LED billet bolt lights
- Plug and play harness with offset cable lengths
- Installs into the holes of the grille with no cutting or drilling
- Fits Wrangler JL and Gladiator JT models
SKU: ORC5870-001 -
Grille LED Light Kits
Oracle Lighting Pre-Runner Style LED Grille Light Kit (Amber) – 5870-005
- Pre-Runner style grille light kit with three 3W LED billet bolt lights
- Amber color, installs into the holes of the grille
- No cutting or drilling, plug and play harness
- Fits four-door Wrangler JL Unlimited
SKU: ORC5870-005
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.









