Overview
The Oracle Lighting Single Color Underbody Rock Light Kit in white, part number 5410-001, is a pair of 3-watt high intensity LED rock lights for under-cab and underbody lighting. The kit consists of two LEDs with a stud-style screw design, which makes them easy to fasten to a surface.
The housing is resin-injected, which makes the light weatherproof. The kit is suited to rugged applications such as under-cab rock lighting. Installation goes through the inner fender liner, which requires a 3/8-inch hole drilled for the stud.
Key features
- Two High Intensity LEDs
- 3-watt single-color white light
- Resin-injected, weatherproof housing
- Stud-style screw design
- Installs through the inner fender liner
Planning the rock light layout
Placement under the cab decides how much of the light reaches the ground and how well the wiring stays protected. Before drilling, check the far side of the inner fender liner for brake lines, fuel lines and wiring harnesses, and clear the area so the stud sits flat against the liner. Keep the lights away from the tire path and from spots where debris hits hardest.
Rock lights are often run with a switch and a fused power feed, and the wire should be routed with loose slack and secured along the frame so it does not rub. Inspect the lens and the housing seal after trail use, because grit and water can work into the mounting area. Replacing a cracked lens early keeps the rest of the assembly dry.
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5410-001 |
| Light type | LED rock light kit |
| Quantity | Two LEDs |
| Color | White, single color |
| Power | 3-watt LEDs |
| Mounting | Stud-style screw, through the inner fender liner |
| Hole size | 3/8 inch |
| Housing | Resin-injected, weatherproof |
Vehicle fitment
This is a universal-fit kit, so it is not built for one vehicle. Under-cab mounting depends on the vehicle. The owner chooses the spot and confirms that a 3/8-inch hole fits the fender liner.
Installation notes
Drill a 3/8-inch hole through the inner fender liner for each light, then secure the stud. Keep the wiring clear of the tires, suspension and moving parts. Check local rules on underbody lighting before using the kit on a road vehicle.
What’s included
The kit includes two LED rock lights. Check the package contents against your installation before starting, including the wiring and controller.












