Lighting & Lighting Accessories
Showing 2209–2220 of 2467 resultsSorted by popularity
-
Offroad Racing Fog & Driving Lights
KC HiLites Flex Single LED Spread Beam System – 269
- Flex Single LED pair with spread beam optics
- 2 x 10W Cree XM-L2 U2 LEDs per light, 5,700K color temperature
- Rated 1,950 raw lumens, 330 lux and 33,000 candela at 10 meters for the spread beam
- 9 to 18 volt operation, IP68 rated, aluminum housings
- Harness with waterproof connectors and a 50,000 hour LED life
SKU: K/C269 -
Lens Covers and Shields
Protective Polycarbonate Cover
- Universal fit Rigid Industries Protective Polycarbonate Cover in red
- Made for D-Series lights
- Optical grade polycarbonate, supplied in 10 in. sections
- Cut for 4 in. or 6 in. covers; does not impede light output
- No part number listed; UPC 849774026706
SKU: RIG201953 -
Offroad Racing Fog & Driving Lights
Oracle Lighting RGB Multifunction Remote – 1713-504
- Universal fit: an RGB remote for ORACLE LED ColorSHIFT lighting
- Controls dimmer, strobe, breathing, on/off and color select
- Wireless range of 100 feet
- Can be programmed to HomeLink, 8A max amp rating
- Metal key fob with keypad guard, 1 year warranty
SKU: ORC1713-504 -
Offroad Racing Fog & Driving Lights
Oracle Lighting Underbody Rock Light Kit (4-Piece) – 5796-333
- Four-piece underbody rock light kit with ColorSHIFT color control
- Three 3W Cree LEDs per module, 150 degree emitting angle
- Powder coat aluminum housing with IP68 rating
- Waterproof connections and 9-32V input
- Bluetooth app control, with a 2-year warranty
SKU: ORC5796-333 -
-
Fog/Driving Light Wiring Kit
PIAA Wiring Harness Up To 85W (PL5FB) with White Square Connectors – 34085
Fog/Driving Light Wiring KitPIAA Wiring Harness Up To 85W (PL5FB) with White Square Connectors – 34085
- Pre-assembled PIAA wiring harness rated up to 85W
- Switch, relay, fuse and light connectors included
- White square connectors, no cutting or splicing needed
- Limited Lifetime Warranty; universal fit
SKU: PIA34085 -
Headlights Housings and Conversions
Oracle Lighting 7″ High Powered LED Headlights (White Halo) – 5769-001
Headlights Housings and ConversionsOracle Lighting 7″ High Powered LED Headlights (White Halo) – 5769-001
- Oracle Lighting 7 inch High Powered LED headlight with white halo, part number 5769-001
- Universal fit for 7 inch round sealed beam openings, with no vehicle named
- Low beam 2200 lumens and high beam 3600 lumens, 6000K output
- D.O.T. and SAE certified with a 2 year warranty
SKU: ORC5769-001 -
-
Side Marker Light Assembly
Omix-ADA Combination Park/Turn Signal Light Assembly (Clear) – 12405.06
- Omix-ADA combination park/turn signal light assembly, part number 12405.06
- Clear lens; direct OE replacement design built to original specifications
- Confirm year, model and trim before ordering.
- Limited five-year warranty.
SKU: OAI12405.06 -
Tail & Brake Lights
Poison Spyder 4 Inch LED Tail Light – 41-04-051
- Fits a 4-1/2 inch round hole in a flat panel, the cutout used by Poison Spyder Crusher Corners and Trail Corners
- 24-diode LED lamp in a 4 inch round housing, red or clear lens
- Push-in mounting with a rubber grommet, no fasteners listed
- Includes the wiring pigtail harness; sold individually
SKU: PSC41-04-051
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.









