Overview
The Trail Gear LED turn signal kit in amber, model 180516-KIT, is a bolt-on set for off-road builds that mounts to 1.75 in. OD tubing with included brackets. It is sold as universal fit, so the tubing and mounting location decide where it goes.
Key features
- Bolt-on mounting with two turn signal brackets
- Amber LED turn signal lamps
- Designed for 1.75 in. OD tubing
- Hardware included: 4 screws and 4 nylock nuts
Signal placement on off-road builds
Turn signals on an off-road build have to be seen from the front, rear and sides while staying clear of branches and rock contact. Mounting them on a roll bar or tube at a height that is visible but protected usually works best. Consider the bracket spacing and the angle of the lamp, since a signal aimed too low is easy to miss in daylight.
Amber lamps are the traditional choice for turn indication, and the bolt-on brackets make adjustment straightforward. Vibration is the main enemy of this kind of mounting, so check the fasteners after the first few outings. Keep the wiring routed away from moving parts and shielded where it passes through the frame.
- Measure the tube before buying the brackets
- Position lamps where they stay visible from several angles
- Inspect fasteners and wiring after rough trail use
Specifications
| Brand | Trail Gear |
|---|---|
| UPC | 70000621483 |
| Color | Amber |
| Lamp type | LED |
| Mounting | Bolt on |
| Tubing size | 1.75 in. OD |
Vehicle fitment
It is designed for universal fit and is not tied to a particular year, make or model. Measure your roll bar or mounting tube before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets bolt on, and the supplied screws and nylock nuts fasten them in place. Tubing is not part of the included hardware.
What’s included
2 LED turn signals, 2 turn signal brackets, 4 screws and 4 nylock nuts.
Not included: Plan to source mounting tubing and wiring separately.









