Overview
The Spyder Auto Group Dual Halo LED Projector Headlights, part number 5010339, are black G2 version projector headlights for the 1999–2004 Ford F-250 Super Duty and the 2000–2004 Ford Excursion. Dual halo is the design name, so check the lit appearance in photos before buying if the ring look matters for your truck.
Bulbs are included. The units are OEM standard quality and are designed for direct replacement of stock lights. Confirm whether one piece or a pair is needed for your installation before ordering.
Key features
- Dual halo LED design, per the product name
- Black finish
- G2 version
- Bulbs included
- Excursion trims include Eddie Bauer, Limited, XLS and XLT
- Super Duty trims include Harley-Davidson Edition, King Ranch, Lariat, XL and XLT
Before you install
Projector headlights focus light through a lens and shield, which gives a defined cut-off line instead of the spread of a reflector housing. On a full-size truck the beam height depends on the mounting angle and the aim adjusters, so the aim needs checking after the swap. Park on level ground facing a wall or garage door, switch the lights on, and adjust both sides until the cut-off sits evenly.
Halo rings are a visual feature wired separately from the low and high beams in most assemblies. The halo circuit should run from its own fused power source or relay rather than pulling current through the factory wiring. Once wired, check that the halo and beams switch on together and that the lights do not flicker when the engine runs.
- Label connectors before removing the old units
- Inspect connectors for corrosion or heat marks
- Recheck aim after the first few drives
Specifications
| Brand | Spyder Auto Group |
|---|---|
| Part number | 5010339 |
| UPC | 847245010339 |
| Type | Headlight assembly with halo, LED |
| Color | Black |
| Version | G2 |
| Quantity | 1 pc. and Pair, both listed |
| Bulbs | Included |
Vehicle fitment
The headlights fit the 2000–2004 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims, and the 1999–2004 Ford F-250 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Model years after 2004 and the F-150 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a full headlight assembly on these trucks means removing the factory unit first. Once fitted, check the beam aim with the lamps lit, and wire the halo through a fused relay if the harness requires it.
What’s included
Bulbs included with the headlights; confirm whether one unit or a pair is needed.
Not included: Relays, wiring harnesses and mounting hardware; check your installation needs before starting.









