Overview
The Vision X Lighting 9892443 is a white 7-inch round Vortex LED headlight kit for direct replacement of a 7-inch factory headlight. It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7, the 1981–1985 Jeep Scrambler, the 2007–2016 Jeep Wrangler (JK) and the 1997–2006 Jeep Wrangler (TJ), in the trims named below.
The Vortex is built for vehicles with a 7-inch factory headlight or a custom 7-inch mounting area, and it is suited to Jeeps, classic cars and motorcycles. It uses PAR56, H6016 and H6024 direct replacement bases, offers high, low and halo beam patterns, and includes multiple wiring connectors. The superwhite beam gives a natural light color.
Key features
- High, low and halo beam patterns
- Superwhite beam that gives a natural light color
- Shatterproof polycarbonate lens
- Multiple wiring connectors
- PAR56, H6016 and H6024 direct replacement bases
- DOT certified
- Suited to 2-door and 4-door models
Beam modes and road use
A multi-mode headlight changes beam pattern depending on the wiring, so the switch and relay setup matters as much as the lamp itself. Plan which mode runs with the low beam and which runs as a separate circuit before cutting into any factory harness. A fused relay near the battery is the usual way to keep the auxiliary feed protected.
Keep the rear of the housing clear of mud, and check the lens after rough trail use. Wipe the lens with mild soap and water to keep the beam clear. Local rules on high beam and halo use vary, so review them before the kit is used on public roads.
- Confirm the bulb base before ordering any adapter
- Route the switch where the driver can reach it
- Clean the lens regularly to keep the beam clear
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 9892443 |
| UPC | 887009892443 |
| Color | White |
| Diameter | 7 inch, round |
| Beam patterns | High, low, halo |
| Lens | Shatterproof polycarbonate |
| Replacement bases | PAR56, H6016, H6024 |
| Fitment type | Direct fit |
| Type | Headlight assembly |
Vehicle fitment
The kit fits five Jeep entries: the 1976–1983 CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 1981–1985 Scrambler (Base, Laredo, Renegade, SL, SR), the 2007–2016 Wrangler JK (including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, plus the Unlimited versions) and the 1997–2006 Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X).
Cherokee, Grand Cherokee, YJ, LJ and JL models are not covered. Compare your Jeep’s model year and trim with the entries above before you choose this kit.
Installation notes
The kit uses direct replacement bases, so confirm that the bulb base on your current headlight matches PAR56, H6016 or H6024 before starting. Fused wiring is the usual approach for auxiliary and high-beam circuits, and local road-use rules for auxiliary and daytime lighting apply to the halo and high-beam modes.
What’s included
The kit includes the 7-inch round Vortex headlight with multiple wiring connectors and the replacement bases named above. Not included: Check the package contents against your installation before starting, since mounting brackets and a wiring harness may be needed for your vehicle.












